DVA T4
DVA T4
DVA T4
DVA T4
go back to standard view
close
DVA T4
DVA T4
A three-way active line array system, the DVA T4 has set new standards in the sound reinforcement industry since its 2007 market launch. Better yet, it has brought the benefits of real line array technology to a much wider range of users. Equipped with top-notch features and engineered for maximum versatility, the DVA T4 delivers premium performance and ensures excellent return on investment.
A three-way active line array system, the DVA T4 has set new standards in the sound reinforcement industry since its 2007 market launch. Better yet, it has brought the benefits of real line array technology to a much wider range of users. Equipped with top-notch features and engineered for maximum versatility, the DVA T4 delivers premium performance and ensures excellent return on investment.
The DVA T4 is equipped with unique digital power amps that provide a total of 420W RMS.
 Driven by Digipro® technology, it renders signals very accurately thanks to a multiband compressor/ limiter with separate response curves for each signal path. 
The 8“ Neodymium-Woofer is equipped with a high power 2.5“ voice coil to provide superior sound pressure level in a very compact size.
The 6.5“ Neodymium-Midrange speaker has a sealed basket to provide an optimized volume capacity including high sensitivity and superb sound reproduction. 
It also has a horn exit including phase plug for defined and linear sound emission.
The build in 1”Neodymium- Drivers are equipped with a 1.4” Mylar- Membrane which allow a very quick response and provide a linear frequency range at a surprisingly low weight. 


Technical Data
Speaker Type
3-Way Active Line Array Module
Acoustical data
Frequency Response [+/- 3dB]
80 - 19.000 Hz
Max SPL
One Unit: 128 dB
HF
2x1 "
Voice Coil HF
1.4 "
Directivity
100x15° Single unit
MF
1x 6.5 "
Voice Coil MF
1.5 "
LF
8 "
Voice Coil LF
2.5 "
Amplifier
Amp Technology
Digipro®
Amp Class
Class D
HF Amp
100 W RMS
MF Amp
100 W RMS
LF Amp
220 W RMS
Cooling
Convection
Processor
Controller
Analog Devices
AD/DA Converter
DSP 24 bit/48 kHz
System Presets
8, HF/Low-mid correction
Limiter
Dual Active Limiter
Multiband RMS, Peak, Thermal
Crossover Frequency MF-HF
1800 Hz
Slope MF-HF
24 dB/Octave
Crossover Frequency LF-MF
400 Hz
Slope LF-MF
24 dB/Octave
Input
Signal Input
1x XLR fem, Bal.
Signal Output
1x XLR male, Bal.
Power Socket
1x Powercon In
1x Powercon Out
Voltage Range
90 - 240 V
Mechanics
Housing
Polypropylen PP reinforced
Housing Design
Trapezoidal 15°
Rigging Points
Integrated rigging hardware
Width
580 mm (23.2 in)
Height
240 mm (9.6 in)
Depth
327 mm (13.08 in)
Weight
13.8 kg (30.42 lbs)
/images/3406/70x70/nocrop/q_100/align_4/discontinued-icon-ok.png.aspx
Discontinued Item
We're sorry
This item has been discontinued
/images/1109/70x70/nocrop/q_100/align_4/ICON_DIGIPRO.png.aspx
Digipro®
Digipro® Class-D power amp technology packs huge performance and operating efficiency into a lightweight solution that leaves a very small footprint.
With its remarkable 1:1 power-output-to-weight ratio, this technology brings highest performance capability to compact speaker systems.
What’s more, it is also phenomenally easy to handle. digipro® - the high-End Powerpack.
/images/817/70x70/nocrop/q_100/align_4/Composer-icon.png.aspx
dBTechnologies Composer
A software able to supply each and every necessary information on the installation of the DVA systems depending on the necessities of the event.
It supplies incidence angles between speakers, pre-set equalizations, Delay time for subwoofers and generates a preview of the sound diffusion based on the systems set up.
It also allows to check the best set up for the subwoofer drums depending on stage and venue needs.
/images/818/70x70/nocrop/q_100/align_4/ICONES_PFC.png.aspx
PFC (Power Factor Corrector)
An integration of the power supply, PFC allows real time correction of the power factor in order to optimize the function of the Digipro and Digipro G2 digital speakers.
Toghether with the full range supply system it enables the systems performances to remain unaltered if tension supply alterations occur.
/images/826/70x70/nocrop/q_100/align_4/ICONES_PRESET.png.aspx
Preset System
The opportunity of modifying the character and equalization of a speaker is a very important prerogative in adapting a speaker to multiple functions.
The introduction of the Preset System in dBTechnologies' FM monitors enables to choose directly from the box the most adeguate equalization for the desired use, optimizing performances without the need of external processors.
The management of phase, limiter and x-over will be modified automatically depending on the chosen set-up, preserving the internal acoustic equipment.
Accessories
Related products
find your distributor
Continent
Continent
North America
Latin America
Europe
Africa
Asia
Oceania
Middle East
Country
Country