DVA T12
DVA T12
DVA T12
DVA T12
DVA T12
go back to standard view
close
DVA T12
DVA T12
Active Line Array module 12"/6.5"/1" 1500 Watt RMS. DVA T12 is a step up the evolutionary ladder from the successful DVA T4 line array system. Although it provides more power and has greater range, its active three-way design makes it just as easy to set up and install as its predecessor.
Active Line Array module 12"/6.5"/1" 1500 Watt RMS. DVA T12 is a step up the evolutionary ladder from the successful DVA T4 line array system. Although it provides more power and has greater range, its active three-way design makes it just as easy to set up and install as its predecessor.
DVA T12 features state-of-the-art neodymium speakers and high-performance DIGIPRO digital amps with total of 1,410W output power.
In combination with top-drawer DSP and premium quality AD-DA converter, it delivers high-definition sonic images with massive SPL for large sound reinforcement applications.
A 12“ neodymium woofer in a band-pass housing covers the low frequency range. Remarkably powerful, it packs an assertive punch that reaches down to 60 Hz to enable fullrange applications. The 12“ woofer is slanted inside the housing, giving the cabinet a lean, unobtrusive look.
Two 6.5“ neodymium midrange are placed close together to maximize coherent coupling and response for those critical midrange frequencies. 
The speaker resides in a sealed basket to optimize the displacement volume. This makes the midrange even more responsive. With a high BL factor, it reacts far faster to transients and renders each attack with awesome accuracy. Both 6.5“ midrange are equipped with an optimized phase plug and feed into a frontloaded horn to achieve a uniform coverage pattern.
The DVA T12 is loaded with 3 1" HF drivers tuned specifically for the custom designed array horn. This combination maximizes the coupling of the drivers‘ outputs and extends the range of the HF signal.


Technical Data
Speaker Type
3-Way Active Line Array Module
Acoustical data
Frequency Response [-6dB]
60 - 19.000 Hz
Max SPL
One Unit: 136 dB
HF
3x1 "
Voice Coil HF
1.4 "
Directivity
100x10 ° Single unit
Horn
Integrated CD Horn
MF
2x 6.5 "
Type MF
Neodymium
Sealed Basket
Phase Plug
Horn Loaded
Voice Coil MF
2 "
LF
12 "
Type LF
Neodymium
Voice Coil LF
3 "
Amplifier
Amp Technology
Digipro® G2
Amp Class
Class D
HF Amp
350 W RMS
MF Amp
350 W RMS
LF Amp
710 W RMS
Cooling
Convection
Processor
Controller
DSP 56 bit
AD/DA Converter
24 bit/96 kHz
System Presets
8, HF/Low-mid correction
Limiter
Dual Active Limiter
Multiband RMS, Peak, Thermal
Crossover Frequency MF-HF
1800 Hz
Slope MF-HF
24 dB/Octave
Crossover Frequency LF-MF
420 Hz
Slope LF-MF
24 dB/Octave
Input
Signal Input
1x XLR fem, Bal.
Signal Output
1x XLR male, Bal.
Network
RDnet remote control RJ45 connector IN/OUT
Power Socket
1x Powercon In
1x Powercon Out
Voltage Range
90 - 240 V
Mechanics
Housing
Polypropylen PP
Aluminium reinforced
Housing Design
Trapezoidal 10°
Rain Cover
Included
Rigging Points
Integrated rigging hardware
Width
580 mm (23.2 in)
Height
386 mm (15.44 in)
Depth
430 mm (17.2 in)
Weight
29,9 kg (63.93 lbs)
Features
  • LONG-THROW SYSTEM
  • FULLY POWERED 3-WAY UNIT
  • FREELY SCALABLE TO SETUPS OF ANY SIZE
  • HIGH-END DIGITAL CONTROLLER ON BOARD
  • NETWORK READY WITH INTEGRATED RDNET PORT
  • HARDWARE COMPATIBLE WITH DVA T8 AND T4
Video
 
 
/images/811/70x70/nocrop/q_100/align_4/ICON_DIGIPRO_G2.png.aspx
Digipro® G2
System of digital amplification engineered by dBTechnologies.
Based on the previous Digipro project, the newest G2 versions' efficiency has been improved by cutting down on consumption and heating.
The introduction of a 'new avant-garde' component, a better s/n relation and a lighter weight, confer a superior dynamism to the new Digipro G2 digital speakers.
/images/817/70x70/nocrop/q_100/align_4/Composer-icon.png.aspx
dBTechnologies Composer
A software able to supply each and every necessary information on the installation of the DVA systems depending on the necessities of the event.
It supplies incidence angles between speakers, pre-set equalizations, Delay time for subwoofers and generates a preview of the sound diffusion based on the systems set up.
It also allows to check the best set up for the subwoofer drums depending on stage and venue needs.
/images/818/70x70/nocrop/q_100/align_4/ICONES_PFC.png.aspx
PFC (Power Factor Corrector)
An integration of the power supply, PFC allows real time correction of the power factor in order to optimize the function of the Digipro and Digipro G2 digital speakers.
Toghether with the full range supply system it enables the systems performances to remain unaltered if tension supply alterations occur.
/images/816/70x70/nocrop/q_100/align_4/ICONES_RD_Net.png.aspx
RD-Net
Digital net for bi-directional control of connected devices.
The acronym RD-Net originates from the development, on behalf of RCF and dBTechnologies, of a universal network which allows adjustments in real time and supervision of all the connected systems, using cables based on ehternet cat 5 wires.
With the specific software and the interfaces control 2 and control 8, a complete command of the acoustic system will be possible allowing real time supervision on each eletrical component of the various speakers.

RDnet allows you to

Monitor levels, limiters, and temperatures
Select system presets
Configure setups off-line
Mute units
Group modules and assigning group EQ, delay and phase  
Test individual components
Automatically address system components   
Tap into LAN and USB interfaces  
Extend the network via wireless LAN access points.
Accessories
Related products
find your distributor
Continent
Continent
North America
Latin America
Europe
Africa
Asia
Oceania
Middle East
Country
Country