FLEXSYS F212
FLEXSYS F212
FLEXSYS F212
FLEXSYS F212
go back to standard view
close
FLEXSYS F212
FLEXSYS F212
The F212 is an active two-way system with considerable reach. A very efficient and powerful mid-/high-range unit, it was designed to be combined with active subwoofers to construct high-performance PA systems.
The F212 is an active two-way system with considerable reach. A very efficient and powerful mid-/high-range unit, it was designed to be combined with active subwoofers to construct high-performance PA systems.
Loaded with two 12“ woofers, this assertive cabinet throws sounds across considerable distances, performing exceedingly well in the low midrange.

Its excellent directivity comes courtesy of ADC (Acoustical Directivity Control) technology that also allows F212 enclosures to be clustered to achieve wider coverage.

The cabinet is driven by two bi-amped digipro® Class-D digital power amps with switched-mode power supplies offering PFC to ensure peak performance even under less-thanperfect live conditions.

A custom-engineered, array-enabled 60° x 40° CD horn, coupled to a next-generation 1“ neodymium compression driver, delivers assertive, high-definition response throughout the upper frequency range.

Sited on top, the high-frequency horn is at a height perfect for stacked arrays, so ground stacks do not have to be placed on platforms or other raised structures. Thanks to the integrated tilt unit, aligning F212 towards the audience is very easy.


With this combination of muscular digital power amps and neodymium magnets, the F212 is a powerful cabinet whose ability to produce exceedingly high SPL belies its surprisingly light weight.


Technical Data
Speaker Type
Quasi 3-Way Active Speaker
Acoustical data
Frequency Response [-10dB]
50 - 20.000 Hz
Frequency Response [+/- 3dB]
65 - 19.000 Hz
Max SPL
132 dB
HF
1 "
Type HF
neodymium compression driver
Directivity
60 x 40 °
Horn
CD Horn
Rotatable Horn
YES
LF
2x12" (with phase plug)
Amplifier
Amp Technology
Digipro®
Amp Class
Class D
Power RMS
1000 W
Peak Power
2000 W
Processor
Controller
DSP 24bit/48kHz
System Presets
Flat, Clustered
Limiter
Dual Active
Peak, RMS, Thermal
Crossover Frequency LF-HF
1800 Hz
Slope LF-HF
24 dB/Octave
Mechanics
Housing
Multiplex
Width
360 mm (14.4 in)
Height
930 mm (37.2 in)
Depth
500 mm (20 in)
Weight
31.5 kg (69.45 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
/images/299/1109/70x70/nocrop/q-100/align-4/ICON_DIGIPRO.png
Digipro®
Digipro® Class-D power amp technology packs huge performance and operating efficiency into a lightweight solution that leaves a very small footprint.
With its remarkable 1:1 power-output-to-weight ratio, this technology brings highest performance capability to compact speaker systems.
What’s more, it is also phenomenally easy to handle. digipro® - the high-End Powerpack.
/images/299/807/70x70/nocrop/q-100/align-4/ICON_DSP.png
DSP: Digital Sound Processor
These models come with a powerful DSP. Serving as an active crossover and controller, it splits and limits the signal and aligns phases and delay times.
Best of all, it even enables dBTechnologies' engineers to fine-tune the enclosures for the most balanced response.
It is this perfect balance that ensures your signals - speech, playback tracks, and live music – are sent accurately in every detail.
That makes a dBTechnlogies product a real all-rounder for every sound reinforcement challenge.
/images/299/818/70x70/nocrop/q-100/align-4/ICONES_PFC.png
PFC (Power Factor Corrector)
The power factor corrector greatly improves the efficiency of the system. Performances of the amplifier are very stable and consistent, regardless of the quality of the mains.
This also grants a worldwide compatibility of the power supply (from 90V to 265V 50/60Hz) and limits power consumption.

/images/299/812/70x70/nocrop/q-100/align-4/ICON_ROTABLE_CD_HORN.png
Rotatable Horn
Specially designed, rotatable high-frequency horns provide very clean and constant directivity.
By rotating the horn, the directivity of high frequencies can be adjusted, depending on the cabinet being assembled horizontally or vertically.
A great and professional feature for fixed installation purposes or when a multifunctional speaker is used as stage monitor.
Accessories
Related products
find your distributor
Continent
Continent
North America
Latin America
Europe
Africa
Asia
Oceania
Middle East
Country
Country