Featuring a dual 18” subwoofer pairing in a bass reflex housing, the DVA S20 delivers powerful performance, rendering frequencies as low as 25 hertz assertively and with impressive authority. It is the perfect sub-bass provider for DVA S10/T4 systems and an excellent complement to DVA T4 mid-/high-range units in stacked arrays.
The DVA S20 subwoofer is equipped with powerful RCF Precision woofers with neodymium magnets and a 4” voice coil for extremely high sound pressures. Double ventilation provides an optimum of cooling, a minimum of power compression at high reliability. The woofers are fibreglass reinforced and have a triple-roll coil embedded in a perfect edging with constant geometry. This combination makes an extreme peak-to-peak steering of up to 48mm possible.
The highly efficient digital power amps of both subwoofers do not need a fan cooling system. The integrated crossover ( 90/120Hz switchable), professional Power-Con mains connectors and a slot on the back of each subwoofer for the optional SDD delay-module are just a few highlights. Mounting points on the back for taking the optional blue-wheels complete the picture.
DVA S20 cardioid bass setup with the SDD module
A cardioid setup comprising the SDD module and three DVA S20 subwoofers on each side keeps levels down on stage and affords you far greater control over low-frequency coverage in the audience area. Never before has this innovative solution – which until today entailed much effort and audio gear – been so easy to achieve with such professional results.
| Speaker Type | Active Bassreflex Subwoofer |
| Frequency Response [+/- 3dB] | 35 - 120 Hz |
| Max SPL | 138 dB |
| Directivity | Omnidirectional, Cardiod Option with SDD Module |
| LF | 2x18 " |
| Type LF | RCF Neodymium |
| Voice Coil LF | 4 " |
| Amp Technology | digipro |
| Amp Class | Class D |
| LF Amp | 2000 W |
| Cooling | Convection |
| Controller | Analog |
| Phase | 0, 180 ° |
| Limiter | RMS, Peak, Thermal |
| Delay Option | SDD Module |
| Crossover Frequency LF-MF | 90, 120 Hz |
| Slope LF-MF | 12 dB/Octave |
| Signal Input | 1x XLR fem, sym. |
| Input Sensitivity [dBu] | -00 - -2 dBu |
| Signal Output | 1x Link XLR, male, sym 1x X-Over Out, XLR male, sym. |
| Power Socket | Powercon In |
| Voltage Range | 240 V |
| Housing | Multiplex birch plywood |
| Housing Design | Rectangular |
| Color | Black, white |
| Surface Texture | Textured acrylic lacquer |
| Handles | 4x Per Side |
| Pole Mount | No |
| Front Grille | 1.5mm metall grille |
| Castors | Optional |
| Width | 1100 mm (44 in) |
| Height | 580 mm (23.2 in) |
| Depth | 700 mm (28 in) |
| Weight | 69 kg (152.12 lbs) |