OPERA 712 DX
OPERA 712 DX
OPERA 712 DX
OPERA 712 DX
go back to standard view
close
Opera 712 DX
OPERA 712 DX
The Opera 712 DX sets the performance standard for other 12“/1“ systems to follow. Feel free to set it up as a fullrange FOH enclosurepair it with subwoofers, or use it as a monitor. But whatever you do with it, rest assured you will enjoy excellent acoustical properties, high sound pressure levels and an impressive audio experience. The recommended subwoofer is the SUB18D
The Opera 712 DX sets the performance standard for other 12“/1“ systems to follow. Feel free to set it up as a fullrange FOH enclosurepair it with subwoofers, or use it as a monitor. But whatever you do with it, rest assured you will enjoy excellent acoustical properties, high sound pressure levels and an impressive audio experience. The recommended subwoofer is the SUB18D
digipro® technology synchronizes power stages and control circuits, creating an intelligent, responsive protection and supervision system. 

An integrated processor controls the ongoing interaction between the audio signal, switched-mode power supply, and PWM output stages, and processes key information concerning the status of the internal signal flow from the input to the speakers. 

digipro® monitors impedance and shuts down in case of short-circuit. 
Thermal limiters attenuate performance if the unit runs hot. 
Peak and RMS limiters protect speakers
Technical Data
Speaker Type
2-Way Active Speaker
Acoustical data
Frequency Response [-10dB]
59 - 20.000 Hz
Frequency Response [+/- 3dB]
70 - 19.000 Hz
Max SPL
128 dB
HF
1 "
Type HF
Compression driver
Directivity
80/65 x 60 °
Horn
Asymmetrical CD Horn
LF
12 "
Amplifier
Amp Technology
digipro®G2
Amp Class
Class D
Power PRG
700 Watt
Processor
Controller
DSP 24bit/48kHz
System Presets
Flat, Processed
Limiter
Dual Active
Peak, RMS, Thermal
Mechanics
Housing
Polyporpylen PP
Angles Up
Monitor use 43 °
Width
432 mm (17.28 in)
Height
655 mm (26.2 in)
Depth
353 mm (14.12 in)
Weight
15,4 kg (33.07 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
/images/299/3406/70x70/nocrop/q-100/align-4/discontinued-icon-ok.png
Discontinued Item
We're sorry
This item has been discontinued
/images/299/795/70x70/nocrop/q-100/align-4/ICONES_ASYMMETRICAL.png
Asymmetrical Horn
The new dBTechnologies asymmetrical horn design delivers similar effective coverage for smaller applications.
The high-frequency horn is narrower on top to bundle sound and throw it over greater distances.
It flares out at the bottom to achieve a wider pattern of throw.
(This compensates for high frequency loss as sound travels further from the source) and distributes the signal more uniformly across all audience areas.
/images/299/811/70x70/nocrop/q-100/align-4/ICON_DIGIPRO_G2.png
Digipro® G2
System of digital amplification engineered by dBTechnologies.
Based on the previous Digipro project, the newest G2 versions' efficiency has been improved by cutting down on consumption and heating.
The introduction of a 'new avant-garde' component, a better s/n relation and a lighter weight, confer a superior dynamism to the new Digipro G2 digital speakers.
/images/299/807/70x70/nocrop/q-100/align-4/ICON_DSP.png
DSP: Digital Sound Processor
These models come with a powerful DSP. Serving as an active crossover and controller, it splits and limits the signal and aligns phases and delay times.
Best of all, it even enables dBTechnologies' engineers to fine-tune the enclosures for the most balanced response.
It is this perfect balance that ensures your signals - speech, playback tracks, and live music – are sent accurately in every detail.
That makes a dBTechnlogies product a real all-rounder for every sound reinforcement challenge.
/images/299/1110/70x70/nocrop/q-100/align-4/ICON_MULTIFUNCTIONAL.png
Multifunctional Housing
A multifunctional housing offers many placement options, for instance as a floor monitor, satellite speaker in combination with subwoofers or as a fullrange system on pole mounts.
/images/299/826/70x70/nocrop/q-100/align-4/ICONES_PRESET.png
Preset System
The opportunity of modifying the character and equalization of a speaker is a very important prerogative in adapting a speaker to multiple functions.
The introduction of the Preset System enables to choose directly from the box the most adeguate equalization for the desired use, optimizing performances without the need of external processors.
The management of phase, limiter and x-over will be modified automatically depending on the chosen set-up, preserving the internal acoustic equipment.
Accessories
Related products
find your distributor
Continent
Continent
North America
Latin America
Europe
Africa
Asia
Oceania
Middle East
Country
Country