Ready 4 MK2

Active Speakers

Download images

Active Speakers

Sales & Rental Network

Ready 4 MK2

Featured with multiple power supply options (battery/power mains), the new Ready 4 can be used in any situation. The battery ensures several hours of autonomy. An exhausted battery can be quickly replaced with a charged battery through the back removable panel. The speaker can be connected to 220 V or 110 V AC power, thanks to a SMPS with auto-range, or a 15 V power supply via an optional external adapter.

Ready 4 features is a stylish contemporary design that will suit any situation.

An optional Bluetooth board, a MIX OUT output and a bright multi-function OLED display enhance the excellent potential of the new Ready 4, placing it right at the top of its category.

TECHNOLOGIES

Asymmetrical HornThe dBTechnologies asymmetrical horn design delivers similar effective coverage for smaller applications. The high-frequency horn is narrower on top to bundle sound and throw it over greater distances. It flares out at the bottom to achieve a wider pattern of throw. This compensates for high frequency loss as sound travels further from the source) and distributes the signal more uniformly across all audience areas.

Digipro® G2System of digital amplification engineered by dBTechnologies. Based on the previous Digipro project, the newest G2 versions' efficiency has been improved by cutting down on consumption and heating. The introduction of a 'new avant-garde' component, a better s/n relation and a lighter weight, confer a superior dynamism to the new Digipro G2 digital speakers.

Multifunctional HousingA multifunctional housing offers many placement options, for instance as a floor monitor, satellite speaker in combination with subwoofers or as a fullrange system on pole mounts.

Preset SystemThe opportunity of modifying the character and equalization of a speaker is a very important prerogative in adapting a speaker to multiple functions. The introduction of the Preset System enables to choose directly from the box the most adeguate equalization for the desired use, optimizing performances without the need of external processors. The management of phase, limiter and x-over will be modified automatically depending on the chosen set-up, preserving the internal acoustic equipment.

SMPSAn SMPS is an electronic power supply that uses high-frequency switching and control circuits to convert electrical power efficiently. It transforms input voltage (AC or DC) to a regulated output voltage with minimal energy loss. Commonly used for its high efficiency, small size, and lightweight design.

Technical Data

Speaker Type

Bi-amp battery-powered speaker

Acoustical data

Frequency Response [-10dB]

70 - 20.000 kHz

Max SPL

120 dB

Voice Coil HF

Directivity

85/65 x 60°

Horn

Asymmetrical CD Horn

10"

Voice Coil LF

1.5"

Amplifier

Amp

Class D High efficiency power amplifier

Peak Power

200 Watt

Controls

1x OLED display with 4 push buttons, 4 x rotative knobs, 1x 3-position power supply source switch (external, internal or OFF)

Cooling

convection

Main PSU

VDE socket: auto-range SMPS (110v~ -220 V~) for full operation and battery charging

Internal Battery PSU

12V - 7Ah lead acid battery (user-replaceable)

External 15V PSU

DC conn. for 15V external power supply

Processor

Controller

DSP 56 bit

AD/DA Converter

24bit/48kHz

Crossover Frequency LF-HF

1950 Hz

Slope LF-HF

24 dB/Octave

Limiter

Dual Active

Peak/RMS, Thermal

Special features

Digital battery charger, Battery management and power saving functions

Input

Master Channel

1x Master volume potentiometer

Mic/Line Channel

1x Combo (XLR/jack) input, 1x Mic/Line volume control, 1x Mic/Line selection switch

Wireless Mic Channel

1x 16ch. UHF wireless built-in receiver, 1x Wireless receiver volume control

Media Channel

2x RCA unbalanced inputs, 1x Bluetooth™ built-in audio receiver (optional), 1x USB type “A” port for media files (MP3/WMA/AAC), 1x RCA/USB/Bluetooth™ volume control

Mix output

1x 6.3” unbalanced jack mix Out

Mechanics

Housing

Polypropylen PP

Angles Up

Monitor use 43°

Handles

1x top side

Width

343 mm (13.72 in)

Height

553 mm (22.77 in)

Depth

304 mm (11.97in)

Weight

11.3 kg (24.91 lbs)

Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.

Filename:	Category:	Filetype:	Size:	Language:	Release:
Man_Ready4MK2_ rev.1.0	Manual	PDF	3,10 MB	English	2018-07-28
Ready 4 Datasheet	Data Sheet	PDF	1,23 MB	English	2018-07-28
Ready4-Firmware0.1.6	Firmware	ZIP	0,08 MB	English	2021-09-28