VIO W10
VIO W10
VIO W10
VIO W10
VIO W10
VIO W10
VIO W10
VIO W10
VIO W10
VIO W10
VIO W10
VIO W10
VIO W10
VIO W10
VIO W10
VIO W10
go back to standard view
close
VIO W10
VIO W10
The ultra-slim wedge speaker designed to be discreetly integrated in broadcast studios, theatre stages, congress facilities and wherever an unobtrusive and versatile wedge is needed
The ultra-slim wedge speaker designed to be discreetly integrated in broadcast studios, theatre stages, congress facilities and wherever an unobtrusive and versatile wedge is needed
This 2-way system is equipped with 4x4” neodymium HF speakers and 1x10” woofer, placed in an exclusive anti-feedback acoustic configuration. The cabinet is driven by a 400 W RMS Digipro G3 amplifier and full remote control is enabled via RD-Net and Aurora Net software.

Digital Sound Processing allows a variable acoustic focus via on-board presets or via software. As a matter of facts, user can easily adapt the wedge performance to the application in use and to the speakers’ needs, choosing among 4 different options: default, close narrow, close wide, far.

VIO W10’s wooden cabinet comes with a black polyurea finish and an exclusive front-rear-grille design which contributes to a peculiar yet discreet look, with a special attention to details. In facts, an integrated handle is hidden on left side to ease transport and a special groove carved on bottom side facilitates the passage of cables under the cabinet, allowing a clean and tidy look on stage.
Technical Data
Speaker Type
2-Way Active Wedge Monitor
Acoustical data
Usable Bandwith [- 10 dB]
58 - 15,000 Hz
Frequency Response [- 6 dB]
68 - 14,000 Hz
Max SPL
126 dB
HF
4x 4" - 1" v.c. Neodymium
LF
1x 10" - 2.5" v.c.
Horizontal Directivity
Dependent on Focus Preset
Vertical Directivity
Dependent on Focus Preset
Amplifier
Amplifier
400 W RMS Class D Digipro® G3
Cooling
Convection
Power Supply
Auto-range SMPS
Processor
Controller
DSP 28/56 bit
Converter AD/DA
24 bit/48 kHz
Limiter
Peak, RMS, Thermal
Processing (filters)
Linear Phase FIR Filters
Input
Signal Input
1x XLR female, 1x RJ45 Link (RDNet) , 1 x USB (Data Service)
Signal Output
1xXLR male, 1x RJ45 Link (RDNet)
Power Socket
1x PowerCON TRUE1 In
1xPowerCON TRUE1 Out
Controls
1x Rotary Encoder (8 presets)
1 x Input Sensitivity Encoder
1xMic /line switch
1x On LED
1x Status -LED
1x Signal LED
1x Limiter LED
Mechanics
Housing
Wooden cabinet, Polyurea painting
Handles
1 on left side
Width
450 mm (17.71 in)
Height
165 mm (6.49 in)
Depth
480 mm (18.89 in)
Weight
13.7 kg (30.20 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
Features
  • Active 2-way wedge monitor
  • Innovative ultra-slim design
  • Height 165 mm only
  • 400W RMS Class-D amplifier
  • Anti-feedback acoustic configuration
  • Variable acoustic focus
  • Remote control via RDNet
  • Exclusive front-rear grille design
/images/299/4949/70x70/nocrop/q-100/align-4/Logo-Aurora-no-scritta.png
Aurora Net
This product is fully-compatible with Aurora Net software
/images/299/3731/70x70/nocrop/q-100/align-4/FIR-filters-icon.png
Linear Phase FIR Filters
A low-latency sound processing featuring Linear Phase FIR filters allows VIO cabinets to deliver an extremely coherent audio performance, standing out for its intelligibility and clarity from every listening position. This is also achieved by making the phase response as linear as possible, avoiding any distortion.
/images/299/816/70x70/nocrop/q-100/align-4/ICONES_RD_Net.png
RDNet
Digital net for bi-directional control of connected devices.
The acronym RDNet originates from the development, on behalf of RCF and dBTechnologies, of a universal network which allows adjustments in real time and supervision of all the connected systems, using cables based on ethernet cat 5 wires.
With the specific software and the interfaces control 2 and control 8, a complete command of the acoustic system will be possible allowing real time supervision on each electrical component of the various speakers.

RDNet allows you to

Monitor levels, limiters, and temperatures
Select system presets
Configure setups off-line
Mute units
Group modules and assigning group EQ, delay and phase  
Test individual components
Automatically address system components   
Tap into LAN and USB interfaces  
Extend the network via wireless LAN access points.
/images/299/5509/70x70/nocrop/q-100/align-4/USB-icon.png
USB Data Port
Thanks to this universal data port, the user will be able to perform firmware upgrades
find your distributor
Continent
Continent
North America
Latin America
Europe
Africa
Asia
Oceania
Middle East
Country
Country