VIO S318
VIO S318
VIO S318
VIO S318
VIO S318
VIO S318
VIO S318
VIO S318
VIO S318
go back to standard view
close
VIO S318
VIO S318
As for lower frequencies, the VIO series is completed by VIO S318 subwoofer, a one of a kind system both for its acoustic configuration and majestic output. Indeed, dBTechnologies succeded in designing an extraordinary powerful triple 18” woofer system while maximizing its frontal emission and extending lower frequencies.
As for lower frequencies, the VIO series is completed by VIO S318 subwoofer, a one of a kind system both for its acoustic configuration and majestic output. Indeed, dBTechnologies succeded in designing an extraordinary powerful triple 18” woofer system while maximizing its frontal emission and extending lower frequencies.

  • Designed to maximize in-phase frontal emission 
  • On-board delay for perfect time alignement 
  • On board cardioid array configuration preset
  • Frequency range extending down to 35Hz
  • Network ready with an integrated RDNet port

Vio S318 is equipped with 3 18” bassreflex half-horn loaded woofers, configured in order to maximize frontal emission. The 3 voice coils are in facts mechanically aligned in order to achieve a perfect phase response.

The 3 DIGIPRO G3 amplifiers deliver a total 2700 W RMS power, allowing the system to reach up to 143dB SPL.

The system features an integrated delay module achieving up to 9.9 ms delay with 0,5  ms steps. The crossover module sets the low pass filter alongside with the highpass filter for the integrated crossover output. The system also features an attenuation control, a polarity switch and a RDnet port for remote control.

The high quality multiplex housing is reinforced with a robust polyurea finishing and equipped with 5 aluminium handles per side.

The dolly transport DT-318 allows to transport up to 3 subs simoultaneously, both on wheels or on lift track. As an alternative to the dolly, wheels can be mounted on the rear side of the cabinet. 

Technical Data
Speaker Type
Active Bassreflex Semi-Horn-Loaded Subwoofer
Acoustical data
Frequency Response [- 6 dB]
39 Hz to Cut Freq (X-Over Dependent)
Frequency Response [- 10 dB]
35 Hz (HPF)
Max SPL
143 dB
LF
3x18"
Voice Coil LF
4 "
Directivity
Omnidirectional
Amplifier
Amp Technology
Digipro® G3
Amp Class
Class D
RMS Power
2700 W
Peak Power
5400 W
Cooling
Convection
Power Supply
2700 W SMPS with Auto Range PSU
Processor
Controller
DSP 64 bit
AD/DA Converter
24 bit/48 KHz
Limiter
RMS, Peak, Thermal
Delay Option
0-9.9 ms internal
Steps of 0.1 ms
Crossover Frequency LF-HF
70-105Hz + Full range
LF-Xover out slope
24 dB/Octave
Input
Signal Input
1xXLR balanced
1xRJ45 LINK (RDNet)
Signal Output
1x XLR balanced
1xRJ45 LINK (RDNet)
Power Socket
1xPowerCON TRUE1 IN
1xPowerCON TRUE1 OUT
Controls
1x Input Attenuation Rotary Switch
2x Rotary Encoder (Delay 9.9 ms)
1XPolarity Inversion Switch (0° or 180°)
1xCardioid Mode Switch
1x X-Over Freq Switch (70-105 Hz + Full Range (steps of 5 Hz)
Mechanics
Housing
Multiplex plywood
Polyurea painted
Handles
4x Per Side
Aluminium
Raincover
Included
Rigging Points
2xPick Points on top to fix DRK-210 rigging frame
Width
1300 mm (51.18 in)
Height
520 mm (20.47 in)
Depth
800 mm (31.5 in)
Weight
103.9 kg (229.06 lbs)
Features
  • ACTIVE 3x18" BASSREFLEX SEMI-HORN LOADED SUBWOOFER
  • INTERNAL DESIGN TO MAXIMIZE IN-PHASE FRONTAL EMISSION
  • ON-BOARD DELAY FOR PERFECT TIME ALIGNMENT
  • ON-BOARD CARDIOID ARRAY CONFIGURATION PRESET
  • FREQUENCY RANGE EXTENDING DOWN TO 35HZ
  • NETWORK READY WITH AN INTEGRATED RDNET PORT
Video
 
 
/images/1848/70x70/nocrop/q_100/align_4/digipro%20G3.png.aspx
Digipro® G3
System of digital amplification engineered by dBTechnologies. 

Based on the previous Digipro projects, completely re-designed, lighter in weight and more efficient, new Heatsink, newest components which maximize the power with a lower consumption.

/images/817/70x70/nocrop/q_100/align_4/Composer-icon.png.aspx
dBTechnologies Composer
A software able to supply each and every necessary information on the installation of the DVA systems depending on the necessities of the event.
It supplies incidence angles between speakers, pre-set equalizations, Delay time for subwoofers and generates a preview of the sound diffusion based on the systems set up.
It also allows to check the best set up for the subwoofer drums depending on stage and venue needs.
/images/816/70x70/nocrop/q_100/align_4/ICONES_RD_Net.png.aspx
RD-Net
Digital net for bi-directional control of connected devices.
The acronym RD-Net originates from the development, on behalf of RCF and dBTechnologies, of a universal network which allows adjustments in real time and supervision of all the connected systems, using cables based on ehternet cat 5 wires.
With the specific software and the interfaces control 2 and control 8, a complete command of the acoustic system will be possible allowing real time supervision on each eletrical component of the various speakers.

RDnet allows you to

Monitor levels, limiters, and temperatures
Select system presets
Configure setups off-line
Mute units
Group modules and assigning group EQ, delay and phase  
Test individual components
Automatically address system components   
Tap into LAN and USB interfaces  
Extend the network via wireless LAN access points.
Accessories
Related products
find your distributor
Continent
Continent
North America
Latin America
Europe
Africa
Asia
Oceania
Middle East
Country
Country