IA3204 R
IA3204 R
IA3204 R
IA3204 R
IA3204 R
IA3204 R
IA3204 R
IA3204 R
go back to standard view
close
IA3204R
IA3204 R

IA3204R is a  2U rack sized class-D power amplifier that can work both for constant voltage systems (70 or 100 Volts) as well as professional audio applications with 4 time 800W 4 ohms, fit for stereo or bridge configuration. Two versions are available: both are equipped with onboard DSP, full range PSU with Power factor correction and a GPIO interface, but they differ on the networking side.

In facts, IA3204R version comes with RDNet ports, and IA3204D with Dante ports, able to embed remote control and digital audio-in.

Technical Data
Type
CLASS D 2 Unit rack Amplifier
Acoustical data
Single channel mode
4 Ohm / 8 Ohm / 16 Ohm (no 70V / 100V)
Bridged mode
8 Ohm / 16 Ohm
Preset
Flat, dBTechnologies speaker, User preset
Input Impedance
20 kOhm balanced
Frequency Response
20 - 20.000 Hz
Amplifier
Total rated power
3200 W RMS @ 230Vac / 120Vac
All channels driven
4 Ohm: 1600W Peak / 800W RMS
8 Ohm: 800W Peak /400W RMS
16 Ohm: 400W Peak / 200W RMS
8 Ohm (Bridge): 3000W Peak / 1500W RMS
70V: 1500W RMS
100V: 1500W RMS
Mains connections
IEC 10A connector
PFC
Yes
Nominal Voltage
115Vac - 240Vac @50/60Hz
Operating Voltage
90Vac - 264Vac @50/60Hz
Processor
AD
24 Bit @48kHz
DA
24 Bit @48kHz
Limiters
Compressor on processing channels
Peak limiter on output channel (also used in dBTechnologies preset)
Input
Input Channel
4 Analog Balanced (EuroBlock 3.81mm)
Output Channel
4 (EuroBlock 5.08mm)
Service Data
Frontal USB
(AuroraNet setup & control)
Networking
2 x RJ45 RDNet
(AuroraNet setup & control)
Mechanics
Width
482 mm (19 in)
Height
88 mm (3.6 in)
Depth
310 mm (12.2 in)
Weight
8.3 kg (18.3 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
Related products
find your distributor
Continent
Continent
North America
Latin America
Europe
Africa
Asia
Oceania
Middle East
Country
Country