DVA KS10

Subwoofers
Subwoofers
515 mm 640 mm 720 mm

FLYABLE ACTIVE SEMI-HORN-LOADED SUBWOOFER

900W RMS DIGIPRO G3 AMP TECHNOLOGY

134 dB MAX SPL

FREQUENCY RESPONSE [-10 dB]: 41 Hz - 120 Hz

LF: 1 x 18”, 4” v.c.

Weight: 43.4 kg (95.69 lbs)

Sales & Rental Network
The semi-horn loaded subwoofer DVA KS10 is equipped with a single 18" woofer driven by a Class-D Digipro@G3 power amp delivering 2000W Peak and reaching 134 dB SPL. Maximun versatility is granted by a stereo input/output balanced pre-amp.  Crucially, KS10 can be used as a compact PA system (together with DVA K5 on a speaker pole) or groundstacked, but can also be flown thanks to the optionally available flyware. A dedicated encoder aloows to apply up to 4.5 ms of delay, with 0.5 ms speps. A switch allows to invert the phase by 180° as well as changing the LPF from 90 Hz to 120 Hz. 
Read More

TECHNOLOGIES

Digipro® G3
Digipro® G3System of digital amplification engineered by dBTechnologies. Based on the previous Digipro projects, completely re-designed, lighter in weight and more efficient, new Heatsink, newest components which maximize the power with a lower consumption.
Product code: 1030102400C
Technical Data
Speaker Type
Active Semi-horn loaded Flyable Subwoofer

Acoustical data
Frequency Response [- 10 dB]
41 Hz - 120 Hz

Max SPL
134 dB

Directivity
Omnidirectional

LF
18 "

Voice Coil LF
4 "

Amplifier
Amp Technology
Digipro® G3

Amp Class
Class D

RMS Power
900 W

Peak Power
1800 W

Cooling
Convection

Power Supply
900 W SMPS with auto range PSU

Processor
Controller
DSP 56 Bit

AD/DA COnverter
24 Bit / 48 KHz

Limiter
Dual Active Multiband RMS, Peak, Thermal

Crossover Frequency LF-HF
90, 120 Hz (selectable)

Slope LF-HF
24 dB/Octave

Input
Input Section
2X XLR Balanced

Output Section
2x XLR Balanced

Power Sockets
1 x Powercon In +

1 x Powercon Out

Controls
1 x Input Sensitivity Rotary Switch

1 x DSP Rotary (up to 4.5 ms on-board)

1 x Polarity Inversion Switch (0°-180°)

1 x X-Over Frequency Switch (90 Hz, 120Hz)

1 x Output Mode Switch (Link - X-Over)

Mechanics
Housing
Multiplex plywood

Handles
2x Side

Pole Mount
1x M20 on top

Rigging Points
2xPick Points on top to fix DRK 10/20 rigging frames


Width
515 mm (20.27 in)

Height
640 mm (25.19 in)

Depth
720 mm (28.34 in)

Weight
43.4 kg (95.69 lbs)

Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
Filename: Category: Filetype: Size: Language: Release:
DWG_DVA-KS10 Drawing DWG 0,36 MB English 2016-08-25
Brochure_DVA-K-Series Catalogues PDF 3,60 MB English 2017-02-02
CE_DVA-KS10 Certifications PDF 0,88 MB Italiano 2016-10-25
Manual_DVA-KS10_Rev1.0 Manual PDF 2,87 MB English 2016-11-03
UKCA_DVA-KS10 Certifications PDF 0,56 MB Italiano 2022-04-11
FW_DVA-KS10_v1.1.0 Firmware ZIP 0,08 MB English 2017-10-27
GLL_DVA-K5-KS10-EF3_v1.8 GLL ZIP 9,72 MB English 2017-07-10
RC MS12SUBH

RC MS12-SUBH

Bags & Covers
SRK acc

SRK-10

Installation
DRK 10

DRK-10 & DRK-10W

Installation
DRK 20

DRK-20

Installation
DS 2

DS 2

Installation
DS2 S

DS2-S

Installation
Kit Wheels

SWK 18 KIT

Transport
Sales & Rental Network