System Specs
Video
Download
Accessories
Astonishing sound pressure in one of the most compact VIO cabinets. VIO L1610 brings the best technology of VIO Series together with an enhanced versatility.

A 3-way system with a symmetric design

VIO L1610 is a three-way active line array system, entirely equipped with neodymium components:
2x10" woofers (2.5” v.c.), providing an extended LF reproduction, interact with a coaxial neodymium component (4” MF plus a 2,5” v.c. HF compression driver) mounted on an exclusively designed waveguide.
This unique coaxial symmetric acoustic design results into the most accurate transient reproduction, which enables VIO L1610 to deliver the most detailed and homogeneous audio performance.
In facts, the coaxial component not only allows an extended low end reproduction of the MF, but guarantees a perfect off-axis coherence alongside with all the benefits coming from woofers' direct radiation, much to the advantage of the system’s headroom.

VIO series' compatibility

Just like any member of VIO family, VIO L1610 has been designed keeping in mind complete compatibility among VIO systems.
Although its remarkable audio performance makes VIO L1610 a powerful yet compact main PA system, both its acoustic and mechanical design makes it the perfect downfill for large VIO L212 systems.
TF-VIO2 adaptor allows to easily rig VIO L1610 modules under a VIO L212 array.

complete networkability

VIO L1610's amp module Digipro G4 comes with a modular slot for expansion cards: as a default, VIO L1610 is equipped with dBTechnologies RD-Net card for real time remote control via Aurora Net software. Nevertheless, the system is ready for upgrades with Audinate Dante™ protocol for digital audio stream as well as well as real time control purposes.

As a support for networking purposes, each VIO L1610 cabinet is equipped with Near Field Communication (NFC™) system and a frontal LED used to recognize each single module within the remote control software Aurora Net.

ULTIMATE AMP TECHNOLOGY

Each VIO L1610 acoustic engine is driven by a Digipro G4® Class-D amplifier module featuring 1600 W RMS along with the utmost acquisitions in dBT’s amp technology.
The system takes advantage of a one-of-a-kind low latency processing resulting from its powerful DSP featuring linear phase FIR filters.
On-board controls (2 rotary encoders) allows DSP presets for Speaker Coupling and High Frequencies compensation.
The amp also allows users to run a test on electronics and transducers before, during and after use: the most useful system test ensuring real time control over the entire PA’s health and tour-grade reliability.

VIO's Smart Rigging system

VIO L1610 comes with VIO series’ peculiar 3-point rigging system allowing a smooth and fast set up of the system. The 2 front links easily connect the modules.The back central rigging strand is equipped with a ring type link allowing user to set the relative splay angles ranging from 1° to 10° thanks to 1 single pin.  Splay angles can be set directly in the dedicated transport cart DT-VIOL210L which houses 4 modules. While lifting up the array, the rigging strand will automatically block the preset angles with no heavy lifting required. The flying frame DRK-210 allows smooth flying operations and system lifting.

Technical
Specifications

Technical Data
Speaker Type
Symmetric 3-way Active Line Array Module
Acoustical data
Usable Bandwidth [-10 dB]
56Hz – 20KHz
Frequency Response [-6 dB]
60Hz – 17KHZ
Max SPL
141 dB
MF/HF (coaxial)
1x1.4" exit
Voice Coil MF
4"
Voice Coil HF
2.5
Type MF/HF
Neodymium
LF
2x10"
Voice Coil LF
2.5"
Type LF
Neodymium
Horizontal Directivity
100°
Vertical Directivity
depends on array size and configuration
Amplifier
Amp Technology
Digipro G4 full range
Amp Class
Class-D
Power RMS
1600 W
Peak Power
3200 W
Cooling
passive convection + internal fan
Power Supply
Full-range SMPS with PFC (100V~-240V~, 50-60Hz)
Preamp technology
Floating Audio input with digital optical isolation
Processor
DSP
32 bit 96 KHz audio processor
AD/DA converter
24bit / 96KHz
Limiter
Dual Active Peak, RMS, Thermal
Advanced DSP Funcions
Linear Phase FIR filters,
manual test,
real time impendance test
Crossover Frequency
500Hz - 3300 Hz
Input
Signal Input
1xXLR fem, Bal.
Signal Output
1xXLR male, Bal.
Network
RDNet Card (1x RJ45 IN 1x RJ45 Link)
Dante Card [Optional]
Power Socket
1xPowerCon TRUE1 IN
1xPowerCon TRUE1 Out
Controls
1 x Speaker Coupling (7 presets)
1 x High pass filter Rotary Encoder (8 presets)
1 x HF Compensation (8 presets)
1 x System Test Button
Technologies
NFC and Frontal LED Identification System
380V Resistant SMPS
IPOS Intelligent Power-On Sequence
Opto-isolated floating pre-amp
System Test
Inclinometer
FIR Fir Filters
Expansion card slot
USB Data Port
SMPS With PFC
Mechanics
Housing
Multiplex Plywood
Polyurea painted
Handles
2x side
Rain Cover
Magnetic rubber (included)
Rigging Points
Integrated 3 point rigging hardware
Width
720 mm (28.35 in)
Height
320 mm (12.6 in)
Depth
520 mm (20.47 in)
Weight
31.3 Kg (69.00 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
find your distributor
Continent
Continent
North America
Latin America
Europe
Africa
Asia
Oceania
Middle East
Country
Country