VIO S115
VIO S115
VIO S115
VIO S115
VIO S115
VIO S115
VIO S115
go back to standard view
close
VIO S115
VIO S115
VIO S115 is anactive active bass reflex flyable subwoofer equipped with a single 15" woofer
VIO S115 is anactive active bass reflex flyable subwoofer equipped with a single 15" woofer
VIO S115 is a self-powered, flyable, single 15" subwoofer, with a standard frontal bass reflex acoustic configuration. It is definitely inspired by dBTechnologies popular VIO S118R subwoofer, with the advantages of being flyable.
This is the most compact VIO sub, just perfect as a complement for all VIO X full range series. The system is loaded with a 15" neodymium woofer, driven by a 900 W RMS Digipro G3 amp, which allows for complete networkability with all other speakers in VIO family. The cabinet is provided with M10 flying points and M20 pole mounts on both top and side of the box, so the sub allows for horizontal or vertical use, when flown or ground stacked. Two different flybars and sub brackets open for tons of possible configurations with VIO X206 boxes when in line array mode, a single flybar allowing for a simple set up, and a double flybar, which allows to fly multiple sub arrays and top arrays together, and many more configurations that will suit any installation requirements.
Technical Data
Speaker Type
Active Bassreflex Subwoofer
Acoustical data
Frequency Response [- 6 dB]
40 Hz - (user frequency LPF)
Frequency Response [- 10 dB]
36 Hz - (user frequency LPF)
Max SPL
134 dB
LF
1x 15"
Voice Coil LF
4"
Directivity
Omnidirectional
Amplifier
Amp Technology
Digipro® G3
Amp Class
Class D
RMS Power
900 W
Peak Power
1800 W
Cooling
Convection
Processor
Controller
DSP 32 bit
AD/DA Converter
24 bit/96 KHz
Limiter
RMS, Peak, Thermal
Input
Signal Input
1xXLR balanced
1xRJ45 LINK (RDNet)
Signal Output
1x XLR balanced
1xRJ45 LINK (RDNet)
Power Socket
1xPowerCON TRUE1 IN
1xPowerCON TRUE1 OUT
Controls
1x Input Sensitivity Rotary Encoder
1x X-Over Selection Encoder
1x Delay Selection Encoder
1x Polarity Selection Switch
1x X-Out Mode Selection Switch
1x On LED
1x Status LED
1x Signal LED
1x Limiter LED
3x RDNet Status LED
Mechanics
Housing
Multiplex plywood
Polyurea painted
Pole Mount
1x M20 on Top, 1x M20 on Right Side
Handles
1x Side
Aluminium
Rigging Points
16x M10
Width
650 mm (25.6 in)
Height
420 mm (16.5 in)
Depth
550 mm (21.7 in)
Weight
32.8 kg (72.3 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
/images/299/4949/70x70/nocrop/q-100/align-4/Logo-Aurora-no-scritta.png
Aurora Net
This product is fully-compatible with Aurora Net software
/images/299/1848/70x70/nocrop/q-100/align-4/digipro%20G3.png
Digipro® G3
System of digital amplification engineered by dBTechnologies. 

Based on the previous Digipro projects, completely re-designed, lighter in weight and more efficient, new Heatsink, newest components which maximize the power with a lower consumption.

/images/299/5507/70x70/nocrop/q-100/align-4/Opto-isolated-icon.png
Opto-isolated Preamp
The floating audio input design grants a digital optical isolation between earth ground from the mains and the audio ground flowing into the Preamplifier board.
This galvanic isolation greatly improves resistance to interferences and any unwanted buzzing and noises.
/images/299/5503/70x70/nocrop/q-100/align-4/System-test-icon.png
System Test
A built-in measurement system can read the transducers impedance in real time and provide an instant feedback on the health of your system.
This controls is performed constantly or it can be forced by the user at any time, remotely or from the amplifier panel.
/images/299/5509/70x70/nocrop/q-100/align-4/USB-icon.png
USB Data Port
Thanks to this universal data port, the user will be able to perform firmware upgrades
Accessories
Related products
find your distributor
Continent
Continent
North America
Latin America
Europe
Africa
Asia
Oceania
Middle East
Country
Country