VIO S118R
VIO S118R
VIO S118R
VIO S118R
VIO S118R
VIO S118R
VIO S118R
VIO S118R
go back to standard view
close
VIO S118R
VIO S118R
Equipped with a 18” woofer (4” voice coil), the bass reflex sub has been crafted to complete with impressive low-end VIO line array systems.
Equipped with a 18” woofer (4” voice coil), the bass reflex sub has been crafted to complete with impressive low-end VIO line array systems.
The system’s acoustic engine is driven by a Digipro G4® 1600W Class D amplifier, equipped with PFC (Power Factor Correction) and SMPS which make the cabinet highly resistant to line voltage fluctuations. Digipro G4 preamplifier features a slot module, equipped with a RDNet expansion card as default, allowing system monitoring and control via Aurora Net. Furthermore, the system is ready for Audinate Dante™ Expansion Card allowing integration in a digital audio network.The amplifier also allows users to run a real-time test on electronics and transducers, both remotely via Aurora Net, or directly on the amplifier module. VIO S118R shows an on-board delay module, allowing to reach a max 62 ms delay via Aurora Net and a max 9.9 ms delay with 0.1 ms steps via on-board rotary. The on-board cardioid preset processes the backward sub in inverted stack cardioid configurations, to achieve the best possible cancellation on the rear side automatically.
Technical Data
Speaker Type
Active Bass Reflex Subwoofer
Acoustical data
Frequency Response [- 6 dB]
35 Hz to Cut Freq (X-Over Dependent)
Frequency Response [- 10 dB]
32 Hz
Max SPL
139 dB
LF
1x18"
Voice Coil LF
4 "
Directivity
Omnidirectional
Amplifier
Amp Technology
Digipro® G4
Amp Class
Class D
RMS Power
1600 W
Peak Power
3200 W
Cooling
Convection + Internal Fan
Power Supply
Full-range PSU with PFC
Processor
Controller
DSP 32 Bit
AD/DA Converter
24 bit 96 kHz
Limiter
RMS, Peak, Thermal
Delay Option
0- 9.9 ms | steps of 0.1 ms [on-board]
0 - 62 ms [via RDNet]
Crossover Frequency LF-HF
Selectable 60-110Hz + Full range
LF-Xover out slope
24 dB/Octave
Input
Signal Input
1xXLR balanced
Signal Output
1x XLR balanced (link or X-over)
1xRJ45 LINK (RDNet)
Expansion Card
RDNet Card (1x RJ45 IN 1x RJ45 Link) [included]
Dante card [optional]
Mains Connections
1x PowerCON TRUE1 In
1x PowerCON TRUE1 Out
Controls
1x Input Attenuation Rotary Switch
1x Rotary Encoder (Delay 9.9 ms)
1x Polarity Inversion Switch (0° or 180°)
1x Cardioid Mode Switch
1x X-Over Freq Switch (60-110 Hz + Full Range
1x System Auto-test
Mechanics
Housing
Multiplex plywood
Polyurea painted
Handles
2x Per Side
Aluminium
Pole Mount
M20 Thread
Raincover
Included
Width
720 mm (28.34 in)
Height
520 mm (20.47 in)
Depth
695 mm (27.36 in)
Weight
47 kg (103.62 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
Features
  • ACTIVE 1X18” BASS REFLEX SUBWOOFER
  • LAST GENERATION DIGIPRO G4 AMP TECHNOLOGY
  • 1600 W RMS SMPS AMPLIFIER WITH PFC
  • SYSTEM AUTO-TEST FOR QUICK DIAGNOSTICS
  • DESIGNED FOR MAXIMUM EFFICIENCY IN THE LOWER END
  • ON BOARD DELAY FOR QUICK TIME ALIGNMENT OPERATIONS
  • ON BOARD CARDIOID ARRAY CONFIGURATION PRESET
  • MODULAR SLOT FOR NETWORK AND DIGITAL AUDIO EXPANSION CARDS (RDNET CARD INSTALLED)
Video
 
 
/images/299/816/70x70/nocrop/q-100/align-4/ICONES_RD_Net.png
RD-Net
Digital net for bi-directional control of connected devices.
The acronym RD-Net originates from the development, on behalf of RCF and dBTechnologies, of a universal network which allows adjustments in real time and supervision of all the connected systems, using cables based on ehternet cat 5 wires.
With the specific software and the interfaces control 2 and control 8, a complete command of the acoustic system will be possible allowing real time supervision on each eletrical component of the various speakers.

RDnet allows you to

Monitor levels, limiters, and temperatures
Select system presets
Configure setups off-line
Mute units
Group modules and assigning group EQ, delay and phase  
Test individual components
Automatically address system components   
Tap into LAN and USB interfaces  
Extend the network via wireless LAN access points.
/images/299/4051/70x70/nocrop/q-100/align-4/digipro-G4-dbtechnologies.png
DIGIPRO® G4
The latest System of digital amplification engineered by dBTechnologies. 


/images/299/4949/70x70/nocrop/q-100/align-4/Logo-Aurora-no-scritta.png
Aurora Net
This product is fully-compatible with Aurora Net software
Accessories
Related products
find your distributor
Continent
Continent
North America
Latin America
Europe
Africa
Asia
Oceania
Middle East
Country
Country