VIO S118
VIO S118
VIO S118
VIO S118
VIO S118
VIO S118
VIO S118
Torna alla visione standard
close
VIO S118
VIO S118

A flyable active subwoofer, equipped with a 18” neodymium woofer and crafted to complete with impressive low-end frequencies and vigorous SPL VIO L210’s accurate, phase coherent wave front.

* Flyable and groundstack configurations require dedicated adapters FSA-VIOL210 and GSA-VIOL210

A flyable active subwoofer, equipped with a 18” neodymium woofer and crafted to complete with impressive low-end frequencies and vigorous SPL VIO L210’s accurate, phase coherent wave front.

* Flyable and groundstack configurations require dedicated adapters FSA-VIOL210 and GSA-VIOL210

dBTechnologies developed a horn loaded design, while maintaining the size of a front-loaded sub cabinet, resulting in a double advantage: smaller dimension (and weight – only 45,1 kg) and a remarkable lower frequencies response even at a  long distance.

This makes this sub the perfect low-end extension of VIO arrays whenever a particularly long-throw is needed.

The system’s acoustical plus points are boosted by Digipro G4® 1600W Class D amplifier, the last generation of the Digipro amp technology which strongly contributed to the success of many dBTechnologies’ professional powered series. Equipped with PFC (Power Factor Correction) and SMPS , VIO S118 is highly resistant to line voltage fluctuations.

Digipro G4 pre-amp features a slot module allowing system monitoring and control via RD Net. Furthermore, the system is ready for future upgrades with DanteTM digital audio transmission network: in facts, VIO S118 also features a NFC system and a LED on the front grille.

The amps also allows users to run auto-test on electronics and transducers before and after use.

The amp module features an on board attenuation control and a delay module allowing to reach a max 9.9 ms delay with 0.1 ms steps. The on board cardioid preset process the sound of the backward sub in cardioid configurations (both flown or groundstacked).

S118’s cabinet is made of sturdy Multiplex plywood covered with a black polyuria finish and equipped with integrated hardware allowing 1 or more subs to be flown in a sub array or on the top of a VIO L210 array.

The system can be flown via DRK-210 flybar plus FSA-VIO L210 adapter for attaching VIO L210. GSA VIO L210 is necessary for stacked configurations with VIO L210.  

The dedicated DO-VIOS118 trolley can be hooked directly on flown subs easing dismantling and transport operations. 

Dati tecnici
Speaker Type
Active Horn-Loaded Flyable Subwoofer
Dati acustici
Frequency Response [- 6 dB]
36 Hz to Cut Freq (X-Over Dependent)
Frequency Response [- 10 dB]
33 Hz (HPF)
Max SPL
139 dB
LF
1x18", Neodymium
Voice Coil LF
4 "
Directivity
Omnidirectional
Amplificatore
Amp Technology
Digipro® G4
Amp Class
Class D
RMS Power
1600 W
Peak Power
3200 W
Cooling
Convection
Power Supply
1600 W with PFC
Processore
Controller
DSP 32
AD/DA Converter
24 bit 96 kHz
Limiter
RMS, Peak, Thermal
Delay Option
0-9.9 ms internal
Steps of 0.1 ms
Crossover Frequency LF-HF
60-110Hz + Full range
LF-Xover out slope
24 dB/Octave
Input Section
Signal Input
1xXLR balanced
Signal Output
1x XLR balanced (link or X-over)
1xRJ45 LINK (RDNet)
Expansion Card
1xRJ45 IN (RDNet)
1xRJ45 LINK (RDNet)
Power Socket
1xPowerCON TRUE1 IN
1xPowerCON TRUE1 OUT
Controls
1x Input Attenuation Rotary Switch
1x Rotary Encoder (Delay 9.9 ms)
1XPolarity Inversion Switch (0° or 180°)
1xCardioid Mode Switch
1x X-Over Freq Switch (60-110 Hz + Full Range
1x System Auto-test
Meccanica
Housing
Multiplex plywood
Polyurea painted
Handles
2x Per Side
Aluminium
Pole Mount
M20 Thread
Raincover
Included
Rigging Points
2xPick Points on top to fix DRK-210 rigging frame (stack use)
4x Pick Points on top and 4x on bottom for rigging
Width
720 mm (28.34 in)
Height
520 mm (20.47 in)
Depth
695 mm (27.36 in)
Weight
45.1 kg (99.42 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
Features
  • Active single 18” horn loaded subwoofer
  • Last generation Digipro G4 Amp Technology
  • 1600 W RMS class D DIGIPRO G4 amplifier with PFC
  • System Auto-Test for quick diagnostics
  • Integrated flying hardware (compatible with VIO L210)
  • Designed for maximum efficiency in the lower end
  • On board delay for perfect time alignement
  • On board cardioid array configuration preset
  • Modular slot for network and digital audio expansion cards
video
 
 
/images/299/5504/70x70/nocrop/q-100/align-4/380V-SMPS-icon.png
380V resistant SMPS
The final amplifiers will be switched off in case of an undesired strike of 380V current, saving them from any damage. The auxiliary power supply - 380V tolerant - determines a safe range of operability for the man power supply.
/images/299/4949/70x70/nocrop/q-100/align-4/Logo-Aurora-no-scritta.png
Aurora Net
This product is fully-compatible with Aurora Net software
/images/299/817/70x70/nocrop/q-100/align-4/iconpertechnologies.png
DVA Composer
Software in grado di fornire ogni informazione necessaria all'installazione dei sistemi DVA e VIO in base alle necessità dell'evento. Fornisce angoli di incidenza tra i diffusori, equalizzazione da impostare e molto altro.
Visita la pagina del Composer per maggiori informazione o per effettuare il download.

/images/299/4051/70x70/nocrop/q-100/align-4/digipro-G4-dbtechnologies.png
DIGIPRO® G4
The latest System of digital amplification engineered by dBTechnologies. 

/images/299/5508/70x70/nocrop/q-100/align-4/ex-card-slot-icon.png
Expansion Card Slot
The preamplifier comes with a RDNet card installed. The user will be able to upgrade the system by replacing the RDNet card with an Audinate™ Dante™ card for audio over Ethernet and remote control on a single cable solution - sold separately.
/images/299/5505/70x70/nocrop/q-100/align-4/IPOS-icon.png
I.P.O.S.
The lntelligent Power-On sequence circuit controls the sequence in which the main power supplies of all units within an array ramp up. As a result, each module is switched on in a different time frame, keeping the overall system’s inrush current low.
/images/299/5506/70x70/nocrop/q-100/align-4/NFC-LED-icon.png
NFC and LED
Near Field Communication proximity sensors are used to determine the position of each box within an array. This technology, together with a hi-brightness LED bulb on the front of the enclosure, contributes to help the user to recognize and match each box with their position on the remote control software.
/images/299/5507/70x70/nocrop/q-100/align-4/Opto-isolated-icon.png
Opto-isolated preamp
The floating audio input design grants a digital optical isolation between earth ground from the mains and the audio ground flowing into the Preamplifier board.
This galvanic isolation greatly improves resistance to interferences and any unwanted buzzing and noises.
/images/299/818/70x70/nocrop/q-100/align-4/ICONES_PFC.png
PFC (Power Factor Corrector)
Integrazione del sistema di alimentazione, il PFC permette di correggere in tempo reale il fattore di potenza per ottimizzare il funzionamento degli amplificatori digitali Digipro. Abbinato al sistema di alimentazione full range permette di mantenere inalterate le prestazioni del sistema anche al variare della tensione di alimentazione.
/images/299/816/70x70/nocrop/q-100/align-4/ICONES_RD_Net.png
RDNet
Rete digitale per controllo bidirezionale dei dispositivi collegati. L'acronimo RDNet deriva dallo sviluppo di RCF e DBTechnologies per un network (rete) universale che permette, tramite cablaggi basati su cavi ethernet cat. 5, modifiche in real time e monitoring di tutti i sistemi collegati. Tramite lo specifico software e l'interfaccia control 2 e control 8 sarà possibile il completo controllo del sistema acustico monitorando anche in tempo reale il funzionamento di ogni parte elettronica dei vari diffusori.
RDNet lets you:•    Monitor levels, limiters, and temperatures •    Select system presets•    Configure setups off-line•    Mute units•    Group modules and assigning group EQ, delay and phase•    Test individual components•    Automatically address system components•    Tap into LAN and USB interfaces•    Extend the network via wireless LAN access point
/images/299/5503/70x70/nocrop/q-100/align-4/System-test-icon.png
System Test
A built-in measurement system can read the transducers impedance in real time and provide an instant feedback on the health of your system.
This controls is performed constantly or it can be forced by the user at any time, remotely or from the amplifier panel.
/images/299/5509/70x70/nocrop/q-100/align-4/USB-icon.png
USB Data Port
Thanks to this universal data port, the user will be able to perform firmware upgrades and diagnostics analisys, by downloading telemetry data on system performance and failures.
Accessori
Prodotti correlati
Trova l'agente di zona
Area
Area
Nord America
Sud America
Europa
Africa
Asia
Oceania
Medio Oriente
Regione
Regione
Abruzzo
Basilicata
Calabria
Campania
Emilia Romagna
Friuli-Venezia Giulia
Lazio
Liguria
Lombardia
Marche
Molise
Piemonte
Puglia
Sardegna
Sicilia
Toscana
Trentino Alto Adige
Umbria
Valle D'Aosta
Veneto