DVA S1518N

Der DVA S1518N ist mit einem 18"-Woofer der neuesten Generation ausgestattet und wird von der integrierten 1500 W starken digipro® G2 Digitalendstufe angetrieben. Mit der optionalen Flughardware SRK-10 lassen sich gefl ogene Sub-Arrays einfach realisieren. Der S1518N empfiehlt sich aber auch als kompakte gestackte Lösung in Verbindung mit DVA T12 und T8.

Der netzwerkfähige DVA Subwoofer S1518N ist mit einem sehr hochwertigen DSP mit ausgezeichneten Audiowerten ausgestattet und verfügt neben einstellbaren Trennfrequenzen auch über präzise Limiterfunktionen und Delayeinstellungen für perfektes Time-Alignement.

Ein spezielles Preset ermöglicht ein einfaches Setup zum Aufbau von Cardiod-Systemen mit hoher Richtwirkung. Alle Einstellungen können leicht über Drehencoder auf der Rückseite vorgenommen werden. Der DSP stellt auch einen X-Over Ausgang zum Anschluss der Topteile bereit und ist präzise in 5 Hz-Schritten einstellbar.

Mit dem bereits integrierten RDnet Netzwerkanschluss sind sie bereit für die Integration in komplexe, fernsteuer- und überwachbare DVA T8 Beschallungssysteme über RJ45 Ein- und Ausgänge zum RDnet-Netzwerkhub. Die Steuerung und Kontrolle erfolgt mit der AuroraNet Software.

Mehr erfahren

TECHNOLOGIES

Aurora NetThis product is fully-compatible with Aurora Net software

Digipro® G2System of digital amplification engineered by dBTechnologies. Based on the previous Digipro project, the newest G2 versions' efficiency has been improved by cutting down on consumption and heating. The introduction of a 'new avant-garde' component, a better s/n relation and a lighter weight, confer a superior dynamism to the new Digipro G2 digital speakers.

Neodymium TransducersNeodymium is a metal belonging to the family of the “rare earth”, a particular material which creates a powerful magnetic field once charged. This material, used in acoustic transducers, possesses a far superior magnetic power compared to the classical ferrite which allows its dimensions to be reduced, favoring its weight and space capacity.

PFC (Power Factor Corrector)The Power Factor Corrector greatly improves the efficiency of the system. Performances of the amplifier are very stable and consistent, regardless of the quality of the mains. This also grants a worldwide compatibility of the power supply - from 90V to 265V 50/60Hz - and limits power consumption.

Preset SystemThe opportunity of modifying the character and equalization of a speaker is a very important prerogative in adapting a speaker to multiple functions. The introduction of the Preset System enables to choose directly from the box the most adeguate equalization for the desired use, optimizing performances without the need of external processors. The management of phase, limiter and x-over will be modified automatically depending on the chosen set-up, preserving the internal acoustic equipment.

RDNetDigital net for bi-directional control of connected devices. The acronym RDNet originates from the development, on behalf of RCF and dBTechnologies, of a universal network which allows adjustments in real time and supervision of all the connected systems, using cables based on ethernet cat 5 wires. With the specific software and the interfaces control 2 and control 8, a complete command of the acoustic system will be possible allowing real time supervision on each electrical component of the various speakers. RDNet allows you to monitor levels, limiters, and temperatures, select system presets, configure setups off-line, Mute units, Group modules and assigning group EQ, delay and phase, test individual components, automatically address system components, tap into LAN and USB interfaces, extend the network via wireless LAN access points.

SMPSAn SMPS is an electronic power supply that uses high-frequency switching and control circuits to convert electrical power efficiently. It transforms input voltage (AC or DC) to a regulated output voltage with minimal energy loss. Commonly used for its high efficiency, small size, and lightweight design.

Product code: 1030101711

Technische Daten

Speaker Type

Active Bandpass Subwoofer

Akustische Daten

Frequency Response [+/- 3dB]

39 - 120 Hz

Max SPL

138 dB

Directivity

Omnidirectional, Cardiod Option with DSP setup

LF

18 "

Voice Coil LF

4 "

Verstärker

Amp Technology

Digipro® G2

Amp Class

Class D

Power Supply

1.5 kW SMPS

LF Amp

1500 W RMS

Cooling

Convection

Prozessor

Controller

DSP 56 bit

AD/DA Converter

24bit/ 96 kHz

System Presets

X-Over,Delay

Phase

0, 180 °

Limiter

RMS, Peak, Thermal

Delay Option

0-4.5 ms internal

Crossover Frequency LF-MF

75-120Hz | steps of 5Hz

LF-Xover out slope

24 dB/Octave

Mechanik

Housing

Multiplex plywood

Housing Design

Rectangular

Handles

3x Per Side

Accessory

Dolly, Wheels 100mm,

Dust Cover, Rain Cover

Pole Mount

M20

Rigging Points

integrated for SRK10 fly kit

2xPick Points on top to fix

DRK10/20 rigging frames

Width

515 mm (20.6 in)

Height

640 mm (25.6 in)

Depth

720 mm (28.8 in)

Weight

46 kg (101.41 lbs)

Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.

Filename:	Category:	Filetype:	Size:	Language:	Release:
DWG_DVA-S1518	Drawing	DWG	0,70 MB	English	2015-05-04
Catalogue_DVA-2025	Catalogues	PDF	32,26 MB	English	2025-05-29
CE_DVA-S1518N	Certifications	PDF	0,93 MB	Italiano	2016-10-25
Manual_DVA-S1518N-S2585N_Rev4.0	Manual	PDF	17,79 MB	English	2015-02-10
FW_DVA-S1518_v3.1.1	Firmware	ZIP	0,28 MB	English	2017-06-01
GLL_DVA-S1518N_v1.gll	GLL	ZIP	18,19 MB	English	2016-10-10