VIO X206

Point Sources
Back to gallery
Point Sources
210 mm 650,8 mm 270 mm

2-WAY ACTIVE LOUDSPEAKER

900 W RMS CLASS-D DIGIPRO® G3 AMPLIFIER

MAX SPL131 dB

FREQUENCY RESPONSE [-6dB]: 70 - 17.500/18.000 Hz

AURORA NET READY

HF: 1x 1”, 1.75" v.c.

LF: 2x 6.5”, 1.75" v.c.

Sales & Rental Network
VIO X206 ist ein ultrakompakter professioneller Lautsprecher, der  Schalldruck und lineare Wiedergabe auf höchstem Niveau liefert, aber darüber hinaus in ein echtes kompaktes Line-Array-System verwandelt werden kann. Der Lautsprecher wurde in zwei verschiedenen Versionen entwickelt, wobei ein Modell mit einem um 90° mal 60° drehbaren Horn ausgestattet ist. Die andere ist mit einem Zweiwege-Waveguide ausgestattet, der ein Abstrahlverhalten von 100° x 15° bietet, also perfekt für Line-Array-Anwendungen geeignet ist. Der Clou dabei ist, dass der Anwender die Hörner jederzeit nach Bedarf austauschen kann.
Die Firmware zur Anpassung des Verhaltens der 2 Hörner kann mit dem Schalter auf der Rückseite der Box entsprechend geändert werden.
VIO X206 ist mit zwei 6,5"-Neodym-Wandlern und einem 1"-Treiber ausgestattet, die von einem 900W RMS Digipro G3 Verstärker angetrieben werden. Wie alle anderen Boxen der VIO X-Serie ist die Box dank RDNet vollständig vernetzbar und lässt sich über Aurora Net in Echtzeit überwachen und steuern.
Dank dieser beiden Varianten deckt er eine breite Palette von Anwendungen ab und erfüllt die Anforderungen sowohl der Produktion als auch der Systemintegration. Das schlanke Gehäuse passt problemlos auf eine Live-Bühne, in einen Veranstaltungssaal, in einen Besprechungsraum oder in eine Bar. Eine Reihe von Zubehör unterstützt Sie dabei, die beste Konfiguration für den jeweiligen Veranstaltungsort zu finden. Mit verschiedenen Halterungen lässt sich die X206 auf einem Lautsprecherständer montieren (VB-2X6, SA-2X6), eine Halterung ermöglicht auch das Fliegen mit einer C-Clamp (VB-2X6). Eine einfache Verbindungsplatte (LP-2) ist erhältlich, um sie zu verbinden oder zu koppeln. Es ist auch möglich, zwei der 90x60°-Version sowohl geflogen als auch am Boden gestackt mit einer 60°-Spreiz-Halterung (LP-3) zu verwenden. Mit einer zusätzlichen Halterung mit 60°-Spreizung können bis zu sechs 90x60°-Boxen nebeneinander geflogen oder am Boden montiert werden, wobei der Winkel konstant bleibt. Eine U-förmige Halterung (HB-2X6) ermöglicht verschiedene Konfigurationen wie Wand- oder Traversenmontage. Das gleiche Zubehör dient auch als horizontale Polhalterung für eine 90x60° X206 oder mehrere Line-Array-Versionen der X206. 
Mehr erfahren

TECHNOLOGIES

Aurora Net
Aurora NetThis product is fully-compatible with Aurora Net software
Digipro® G3
Digipro® G3System of digital amplification engineered by dBTechnologies. Based on the previous Digipro projects, completely re-designed, lighter in weight and more efficient, new Heatsink, newest components which maximize the power with a lower consumption.
Linear Phase FIR Filters
Linear Phase FIR FiltersA low-latency sound processing featuring Linear Phase FIR filters allows cabinets to deliver an extremely coherent audio performance, standing out for its intelligibility and clarity from every listening position. This is also achieved by making the phase response as linear as possible, avoiding any distortion.
Opto-isolated Preamp
Opto-isolated PreampThe floating audio input design grants a digital optical isolation between earth ground from the mains and the audio ground flowing into the Preamplifier board.This galvanic isolation greatly improves resistance to interferences and any unwanted buzzing and noises.
RDNet
RDNetDigital net for bi-directional control of connected devices. The acronym RDNet originates from the development, on behalf of RCF and dBTechnologies, of a universal network which allows adjustments in real time and supervision of all the connected systems, using cables based on ethernet cat 5 wires. With the specific software and the interfaces control 2 and control 8, a complete command of the acoustic system will be possible allowing real time supervision on each electrical component of the various speakers. RDNet allows you to monitor levels, limiters, and temperatures, select system presets, configure setups off-line, Mute units, Group modules and assigning group EQ, delay and phase, test individual components, automatically address system components, tap into LAN and USB interfaces, extend the network via wireless LAN access points.
SMPS
SMPSAn SMPS is an electronic power supply that uses high-frequency switching and control circuits to convert electrical power efficiently. It transforms input voltage (AC or DC) to a regulated output voltage with minimal energy loss. Commonly used for its high efficiency, small size, and lightweight design.
USB Data Port
USB Data PortThanks to this universal data port, the user will be able to perform firmware upgrades
Product code: 1030103970
Technische Daten
Speaker Type
2 Way Active Loudspeaker

Akustische Daten
Usable bandwidth [-10dB]
66 - 19.500 Hz / 66 - 18.000 Hz [VIO X206-100]

Frequency Response [-6dB]
70 - 18.000 Hz / 70 - 17.500 Hz [VIO X206-100]

Max SPL
131 dB

HF
1x 1”, 1.75 v.c.

LF
2x 6.5”, 1.75" v.c

VIO X206 Directivity
60° x 90° [rotatable]

VIO X206-100 Directivity
100° x 15° [H x V]

Verstärker
Amplifier
900 W RMS Class-D Digipro® G3

Cooling
Convection

Power Supply
Auto-range SMPS

Prozessor
Controller
DSP 32 bit


AD/DA Converter
24 bit/96 kHz


Limiter
Peak, RMS, Thermal


Processing
FIR Linear Phase Filters

Eingang
Signal Input
1 x XLR balanced, 1 x RJ45 Link (RDNet), 1x USB (Data Service)

Signal Output
1x XLR balanced, 1 x RJ45 Link (RDNet)

Power Socket
1x PowerCON TRUE1 In

1x PowerCON TRUE1 Out

Controls
1x input Sensitivity Rotary Encoder (10x presets)

1x Horn Model Selection Switch

1x On LED

1x Status LED

1x Signal LED

1x Limiter LED

3x RDNet Status LED

Mechanik
Housing
Wooden Cabinet, Polyurea painting

Handles
2 Integrated

Rigging points
2x M10 Threaded Nuts (top and bottom)

Width
210 mm (8.3 in)

Height
650 mm (25.6 in)

Depth
270 mm (10.6 in)

Weight
17.3 kg (38.14 lbs)

Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
Filename: Category: Filetype: Size: Language: Release:
DWG_VIO-X206 Drawing DWG 2.21 MB English 0001-01-01
CE_VIO-X206 Certifications PDF 0.56 MB Italiano 2022-04-04
Datasheet_VIO-X206 Data Sheet PDF 0.29 MB English 0001-01-01
Manual_VIO-X206_Rev.1.3 Manual PDF 20.03 MB English 0001-01-01
UKCA_VIO-X206 Certifications PDF 0.58 MB Italiano 2022-11-04
FW_VIO-X206_v02.00.01.dbu2 Firmware ZIP 0.17 MB English 0001-01-01
GLL_VIO-X_Series_v1.0 GLL ZIP 2.75 MB English 0001-01-01
GLL_VIO-X206 GLL ZIP 5.80 MB English 0001-01-01
GLL_VIO-X206_SB-2X6_V1.0.exe GLL ZIP 4.49 MB English 0001-01-01
GLL_VIO-X206-Array_v1.1 GLL ZIP 2.70 MB English 0001-01-01
SB 2x6

SB-2X6

Installation
LP 16

LP-16

Installation
LP 13

LP-13

Installation
SA 35

SA-35

Installation
HK 6090 d

HK-6090

Installation
HK 15100WG d

HK-15100WG

Installation
TB M20

TB-M20

Installation
DRK 2

DRK-2

Installation
DRK 1

DRK-1

Installation
LP 5

LP-5

Installation
LP 3

LP-3

Installation
LP 2

LP-2

Installation
SA 2x6

SA-2X6

Installation
VB 2x6

VB-2X6

Installation
HB 2X6

HB-2X6

Installation
RC 1

RC-1

Bags & Covers
FC 206

FC-206

Bags & Covers
Sales & Rental Network