El IS25T está equipado con dos woofers de 5" más un driver de compresión de 1" para el rango de frecuencias más alto.
Esta caja proporciona una dispersión constante de 60 x100°, y se puede instalar fácilmente tanto en vertical como en horizontal utilizando los mismos accesorios del VIO X205.
No hace falta decir que la palabra clave aquí es: facilidad de instalación y discreción. Por eso, cada uno de los sistemas de la serie IS tiene un diseño suave con pocos puntos de conexión invisibles, conectores Phoenix, en versión blanca o negra.
Leer Mas
TECNOLOGÍAS
EASE FocusEASE Focus makes configuring a DVA or VIO system so much easier as this software simulates the system in the virtual realm. It can depict several audience target zones at the same time to map out more intricate venues including different coverage areas such as arenas, bleachers, and balconies. Color 2D graphics provide an easily understandable view of throw patterns and sound pressure levels so you can configure the array for the best possible results. It also offers you easy access to key rigging parameters such as the height of the rigging frame, the choice of pick points, the array’s bend, total weight, and system preset selections.
Rotatable HornSpecially designed, rotatable high-frequency horns provide very clean and constant directivity. By rotating the horn, the directivity of high frequencies can be adjusted, depending on the cabinet being assembled horizontally or vertically. A great and professional feature for fixed installation purposes or when a multifunctional speaker is used as stage monitor.
White version availableThis product is available for purchase in black or white.
IP55 RatingThe product is resistant to dust and low-pressure water jets. Specifically, IP55 Rating offers limited protection against dust ingress and can withstand water jets from any direction without compromising functionality. This rating is commonly used for devices intended for both indoor and outdoor use.
código del producto: 1030401240
Datos Técnicos
Speaker Type
Passive 2-way Speaker
Datos Acústicos
RMS Power
120 W
Peak Power
480 W
Frequency Response [-6 dB]
85 Hz - 20,000 Hz
Impedance
8 Ohm
Sensitivity 1W@m
94.5 dB
Max SPL
121.5 dB
HF
1x 1", 1.4" v.c.
LF
2x 5", 1" v.c.
Dispersion
100x60° [Rotatable Horn]
X-Over Frequency
1500 Hz (internal X-Over)
Sección de Entrada
Connections
Screw terminal block (IN+ | IN- | OUT+ | OUT-)
Mecánica
Housing
Plywood, polyurea finish
Rigging points
2x M10 threaded nut (top and bottom)
IP rating
IP 55
Width
152 mm (6 in)
Height
485 mm (19 in)
Depth
240 mm (9.4 in)
Weight
7 kg (15.4 lbs)
Notes: Estos datos no son vinculantes; dBTechnologies se reserva el derecho de modificar los mismos en cualquier momento y sin previo aviso.
