VIO S218F

Subwoofers
Subwoofers
1305 mm 531 mm 800 mm

FLYABLE ACTIVE BASSREFLEX SUBWOOFER

3200W RMS DIGIPRO® G4 AMPLIFIER

143 dB MAX SPL

USABLE BANDWIDTH [- 6 dB]: 28 Hz to cut frequency

DANTE & A2NET READY

LF: 2 x 18”, 4” v.c. - NEODYMIUM

Weight: 100Kg (220 lbs)

Sales & Rental Network

El cielo es el límite

Equipado con nuestras tecnologías exclusivas más avanzadas, el VIO S218F amplía las posibilidades de reproducción de bajas frecuencias en cualquier instalación de refuerzo de sonido VIO de mayor tamaño. Ahora puede ampliar el rango de acción del distintivo subwoofer VIO S218 al colgar un conjunto de VIO S218F en el aire. Se pueden colgar hasta 14 cajas con una sola barra de suspensión DRK-218F.

Listo para giras

La aplicación de refuerzo de sonido más exigente para giras requiere una flexibilidad extrema para adaptarse a las necesidades específicas de cada evento en cualquier recinto del mundo. El VIO S218F es el complemento perfecto para graves en grandes instalaciones VIO, con un rendimiento de sonido asombroso y una pegada de ultrabajas que llega hasta los 28 Hz.

Preajuste cardioide

Un botón de preajuste cardioide procesa automáticamente el sonido del subwoofer trasero en configuraciones de pila invertida con gradiente, para lograr la máxima cancelación de la parte trasera. Puede colgar fácilmente el VIO S218 en orientaciones invertidas, según el rechazo hacia atrás deseado. Un paso de cables fácil de usar permite que todos los cables pasen sin problemas por los gabinetes, lo que facilita su gestión.

Leer Mas

TECNOLOGÍAS

380V resistant SMPS
380V resistant SMPSThe final amplifiers will be switched off in case of an undesired strike of 380V current, saving them from any damage. The auxiliary power supply - 380V tolerant - determines a safe range of operability for the man power supply.
Aurora Net
Aurora NetThis product is fully-compatible with Aurora Net software
Digipro® G4
Digipro® G4The latest System of digital amplification engineered by dBTechnologies.
EASE Focus
EASE FocusEASE Focus makes configuring a DVA or VIO system so much easier as this software simulates the system in the virtual realm. It can depict several audience target zones at the same time to map out more intricate venues including different coverage areas such as arenas, bleachers, and balconies. Color 2D graphics provide an easily understandable view of throw patterns and sound pressure levels so you can configure the array for the best possible results. It also offers you easy access to key rigging parameters such as the height of the rigging frame, the choice of pick points, the array’s bend, total weight, and system preset selections.
Expansion Card Slot
Expansion Card SlotThe preamplifier comes with a RDNet card installed. The user will be able to upgrade the system by replacing the RDNet card with an Audinate™ Dante™ card for audio over Ethernet and remote control on a single cable solution - sold separately.
I.P.O.S.
I.P.O.S.The lntelligent Power-On sequence circuit controls the sequence in which the main power supplies of all units within an array ramp up. As a result, each module is switched on in a different time frame, keeping the overall system’s inrush current low.
Neodymium Transducers
Neodymium TransducersNeodymium is a metal belonging to the family of the “rare earth”, a particular material which creates a powerful magnetic field once charged. This material, used in acoustic transducers, possesses a far superior magnetic power compared to the classical ferrite which allows its dimensions to be reduced, favoring its weight and space capacity.
NFC and LED
NFC and LEDNear Field Communication proximity sensors are used to determine the position of each box within an array. This technology, together with a hi-brightness LED bulb on the front of the enclosure, contributes to help the user to recognize and match each box with their position on the remote control software.
Opto-isolated Preamp
Opto-isolated PreampThe floating audio input design grants a digital optical isolation between earth ground from the mains and the audio ground flowing into the Preamplifier board.This galvanic isolation greatly improves resistance to interferences and any unwanted buzzing and noises.
PFC (Power Factor Corrector)
PFC (Power Factor Corrector)The Power Factor Corrector greatly improves the efficiency of the system. Performances of the amplifier are very stable and consistent, regardless of the quality of the mains. This also grants a worldwide compatibility of the power supply - from 90V to 265V 50/60Hz - and limits power consumption.
RDNet
RDNetDigital net for bi-directional control of connected devices. The acronym RDNet originates from the development, on behalf of RCF and dBTechnologies, of a universal network which allows adjustments in real time and supervision of all the connected systems, using cables based on ethernet cat 5 wires. With the specific software and the interfaces control 2 and control 8, a complete command of the acoustic system will be possible allowing real time supervision on each electrical component of the various speakers. RDNet allows you to monitor levels, limiters, and temperatures, select system presets, configure setups off-line, Mute units, Group modules and assigning group EQ, delay and phase, test individual components, automatically address system components, tap into LAN and USB interfaces, extend the network via wireless LAN access points.
System Test
System TestA built-in measurement system can read the transducers impedance in real time and provide an instant feedback on the health of your system.This controls is performed constantly or it can be forced by the user at any time, remotely or from the amplifier panel.
USB Data Port
USB Data PortThanks to this universal data port, the user will be able to perform firmware upgrades
código del producto: 1030104050
Datos Técnicos
Speaker Type
Flyable Active Bassreflex subwoofer

Datos Acústicos
Frequency Response [- 10 dB]
27 Hz (HPF)

Frequency Response [- 6 dB]
28 Hz to cut frequency (Xover dependent)

Max SPL
143 dB

LF
2x18” Neodymium

Voice Coil LF
4”

Directivity
Omnidirectional

Amplificador
Amplifier
3200 W RMS [2x 1600 W RMS Class-D Digipro® G4]


Cooling
Passive convection, internal fan

Power Supply
Full-range SMPS with PFC (100V~-240V~, 50-60Hz)

Procesador
Controller
DSP 32 bit


AD/DA Converter
24 bit/96 kHz


Limiter
Peak, RMS, Thermal


Delay Option
0 - 9.9 ms internal | steps of 0.1 ms [on-board]

Crossover Frequency LF-HF
Selectable 60-110 Hz + Full Range (8 steps)

LF-Xover out slope
24 dB/Octave

Sección de Entrada
Signal Input
1x XLR balanced

1x USB Data Service

Signal Output
1x XLR balanced

Network
RDNet Card (1x RJ45 IN 1x RJ45 Link)

Dante Card [Optional]

Power Socket
1x PowerCON TRUE1 In

1x PowerCON TRUE1 Out

Controls
1x Input Attenuation Rotary Encoder

2x Delay Rotary Encoder (0-9.9 ms)

1x Polarity Inversion Switch (0° or 180°)

1x Cardioid mode Switch

1x X-Over Frequency Rotary Encoder (8 steps)

Special Features
NFCTM and Frontal LED Identification System

380V Resistant SMPS

IPOS Intelligent Power-On Sequence

Opto-isolated floating pre-amp

System Test (transducers diagnostics)

Mecánica
Housing
Multiplex plywood - Polyurea painting


Handles
2x Side. Aluminium


Raincover
Included

Rigging Points
side integrated rigging hardware, 2x Pick Points on top for DRK-210 rigging frame

Width
1300 mm (51.18 in)

Height
520 mm (20.47 in)

Depth
800 mm (31.5 in)

Weight
100 kg (220 lbs)

Notes: Estos datos no son vinculantes; dBTechnologies se reserva el derecho de modificar los mismos en cualquier momento y sin previo aviso.
Ver todos Referencias
Filename: Category: Filetype: Size: Language: Release:
DWG_VIO-S218F Drawing DWG 4,43 MB English 2022-06-28
CE_VIO-S218F Certifications PDF 0,63 MB Italiano 2023-12-14
Manual_VIO-S218F_Rev1.2 Manual PDF 17,80 MB English 2024-05-02
Quick-Start_VIO-S218F_Rev1.1 Manual PDF 2,26 MB English 2024-05-08
FW_VIO-S218F_Dante_v02.01.00.dbu2 Firmware ZIP 0,21 MB English 2024-05-02
FW_VIO-S218F_v02.01.00.dbu2 Firmware ZIP 0,20 MB English 2023-12-19
FW-VIO-S218F_A2NET_v02.01.00.dbu2 Firmware ZIP 0,20 MB English 2025-04-22
GLL_VIO_Series_v1.3.exe GLL ZIP 19,29 MB English 2024-05-24
GLL_VIO-S218F_V1.0.exe GLL ZIP 1,36 MB English 2023-07-31
DCU 1

DCU-1

Electronics
AF VIO1

AF-VIO1

Instalación
CAT6 CAT6 100

CAT6-CAT6-100

Cables
CAT6 CAT6 500

CAT6-CAT6-500

Cables
DAC 500

DAC-500

Cables
DAC 70

DAC-70

Cables
DCK 27T

DCK-27T

Cables
DO VIOS218F

DO-VIOS218F

Transporte
DPTC 1000M

DPTC-1000M

Cables
DPTC 160L

DPTC-160L

Cables
DPTC 500L section

DPTC-500L

Cables
DPTC 70L

DPTC-70L

Cables
DRK 210

DRK 210

Instalación
DRK 212

DRK-212

Instalación
DRK 218F

DRK-218F

Instalación
fc vios 2

FC-VIOS2V

Bolsas Y Fundas
RCD 45F

RDC-45F

Cables
RDC 45M

RDC-45M

Cables
RJ45 RJ45 75

RJ45-RJ45-75

Cables
Sales & Rental Network