Deux Woofer de 18", chacun avec amplificateur numérique Digipro de 1000 Watt/RMS, alimentation SMPS avec PFC et DSP 24 bits/48 kHz. Double fréquence de xover sélectionnable 90/120 Hz. XLR link, XLR xover output. Configuration reflex. Caisson en multicouche de bouleau peint en noir. SPL 138 dB. Dim. 1100x580x720 mm, poids 84 Kg.
En savoir plus
TECHNOLOGIES
PFC (Power Factor Corrector)The Power Factor Corrector greatly improves the efficiency of the system. Performances of the amplifier are very stable and consistent, regardless of the quality of the mains. This also grants a worldwide compatibility of the power supply - from 90V to 265V 50/60Hz - and limits power consumption.
SMPSAn SMPS is an electronic power supply that uses high-frequency switching and control circuits to convert electrical power efficiently. It transforms input voltage (AC or DC) to a regulated output voltage with minimal energy loss. Commonly used for its high efficiency, small size, and lightweight design.
Caractéristiques techniques
Speaker Type
Active Bassreflex Subwoofer
Caractéristiques acoustiques
Frequency Response [+/- 3dB]
35 - 120 Hz
Max SPL
138 dB
Directivity
Omnidirectional, Cardiod Option with SDD Module
LF
2x18 "
Voice Coil LF
4 "
Amplificateur
Amp Technology
Digipro®
Amp Class
Class D
LF Amp
2000 W RMS
Cooling
Convection
Processeur
Controller
Analog
Limiter
RMS, Peak, Thermal
Delay Option
SDD Module
Crossover Frequency LF-MF
90, 120 Hz
LF-Xover out slope
24 dB/Octave
Mécanique
Housing
Multiplex plywood
Housing Design
Rectangular
Handles
4x Per Side
Accessory
Wheels 100mm, Dust Cover
Rigging Points
2xPick Points on top to fix
DRK10/20 rigging frames
Width
1100 mm (44 in)
Height
580 mm (23.2 in)
Depth
720 mm (28.8 in)
Weight
84 kg (185.19 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
