VIO W10

Stage Monitors

Download images

Stage Monitors

2-WAY ACTIVE WEDGE MONITOR

400 W RMS CLASS-D DIGIPRO® G3

MAX SPL126 dB

FREQUENCY RESPONSE [-6dB]: 68 - 14,000 Hz

AURORA NET & DANTE READY

HF: 4x 4" - 1" v.c. NEODYMIUM

LF: 1x 10" - 2.5" v.c. NEODYMIUM

Sales & Rental Network

VIO W10

Le système 2 voies est équipé de 4 haut-parleurs HF de 4”en néodyme et d'un boomer 10 ", placés dans une configuration acoustique spécifique anti-larsen. L'enceinte est pilotée par un amplificateur Digipro G3 de 400 W RMS et le contrôle à distance complet est possible via les logiciels RDNet et Aurora Net.

La structure en bois du VIO W10 est revêtue d’une finition en polyurée noire et d’un design exclusif pour la grille avant-arrière qui lui confère une allure à la fois distinctive mais discrète, avec une attention particulière apportée aux détails. Une poignée intégrée est dissimulée sur le côté gauche pour faciliter le transport et une rainure spéciale sur le dessous facilite le passage des câbles sous l’enceinte, pour un aspect propre et ordonné sur scène.

Le traitement du son numérique permet un focus acoustique variable via les préréglages intégrés ou via le logiciel. En effet, l’utilisateur peut facilement adapter les performances de l’enceinte wedge en fonction de son utilisation, en choisissant entre 4 options différentes: default, close narrow, close wide, far.

TECHNOLOGIES

Aurora NetThis product is fully-compatible with Aurora Net software

Linear Phase FIR FiltersA low-latency sound processing featuring Linear Phase FIR filters allows cabinets to deliver an extremely coherent audio performance, standing out for its intelligibility and clarity from every listening position. This is also achieved by making the phase response as linear as possible, avoiding any distortion.

RDNetDigital net for bi-directional control of connected devices. The acronym RDNet originates from the development, on behalf of RCF and dBTechnologies, of a universal network which allows adjustments in real time and supervision of all the connected systems, using cables based on ethernet cat 5 wires. With the specific software and the interfaces control 2 and control 8, a complete command of the acoustic system will be possible allowing real time supervision on each electrical component of the various speakers. RDNet allows you to monitor levels, limiters, and temperatures, select system presets, configure setups off-line, Mute units, Group modules and assigning group EQ, delay and phase, test individual components, automatically address system components, tap into LAN and USB interfaces, extend the network via wireless LAN access points.

USB Data PortThanks to this universal data port, the user will be able to perform firmware upgrades

Product code: 103010380

Caractéristiques techniques

Speaker Type

2-Way Active Wedge Monitor

Caractéristiques acoustiques

Usable Bandwith [- 10 dB]

58 - 15,000 Hz

Frequency Response [- 6 dB]

68 - 14,000 Hz

Max SPL

126 dB

4x 4" - 1" v.c. Neodymium

1x 10" - 2.5" v.c.

Horizontal Directivity

Dependent on Focus Preset

Vertical Directivity

Dependent on Focus Preset

Amplificateur

Amplifier

400 W RMS Class D Digipro® G3

Cooling

Convection

Power Supply

Auto-range SMPS

Processeur

Controller

DSP 28/56 bit

Converter AD/DA

24 bit/48 kHz

Limiter

Peak, RMS, Thermal

Processing (filters)

Linear Phase FIR Filters

Input Section

Signal Input

1x XLR female, 1x RJ45 Link (RDNet) , 1 x USB (Data Service)

Signal Output

1xXLR male, 1x RJ45 Link (RDNet)

Power Socket

1x PowerCON TRUE1 In

1xPowerCON TRUE1 Out

Controls

1x Rotary Encoder (8 presets)

1 x Input Sensitivity Encoder

1xMic /line switch

1x On LED

1x Status -LED

1x Signal LED

1x Limiter LED

Mécanique

Housing

Wooden cabinet, Polyurea painting

Handles

1 on left side

Width

450 mm (17.71 in)

Height

165 mm (6.49 in)

Depth

480 mm (18.89 in)

Weight

13.7 kg (30.20 lbs)

Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.

Scuola Holden

Italy

View All References

Filename:	Category:	Filetype:	Size:	Language:	Release:
DWG_VIO-W10	Drawing	DWG	2.31 MB	English	2021-08-04
CE_VIO-W10	Certifications	PDF	1.51 MB	Italiano	2019-09-09
Manual_VIO-W10_Rev.1.1	Manual	PDF	10.85 MB	English	0001-01-01
UKCA_VIO-W10	Certifications	PDF	0.54 MB	Italiano	2022-11-04
FW_VIO-W10_v01.00.01	Firmware	ZIP	0.10 MB	English	0001-01-01

Sales & Rental Network

VIO W10

Scuola Holden

TROUVER

ASSISTANCE

Sign up for our newsletter

VIO W10

Scuola Holden

VIO W15T