INGENIA IGS1

Subwoofers
Back to gallery
Subwoofers
578 mm 580 mm 720 mm

ACTIVE BASS-REFLEX SUBWOOFER

1600W RMS AMPLIFIER

136 dB MAX SPL

USABLE BANDWIDTH [- 6 dB]: 39Hz to Xover

LF: 1 x 18”, 4” v.c. - NEODYMIUM

WEIGHT: 45.6 Kg (100 lbs)

Sales & Rental Network
L'IGS1 est équipé d'un seul woofer de 18 pouces placé dans un solide caisson bass-reflex. L'amplificateur Digipro G4 de classe D de 1600 W RMS garantit une fiabilité maximale et une pression acoustique élevée et puissante. Le système est compatible avec la communication RDNet pour un monitoring et un contrôle complet en temps réel via le logiciel Aurora Net (disponible pour Windows et Mac), qui permet de réaliser des configurations avancées entre les systèmes IGS1 et IGS2 et une adaptation parfaite avec les systèmes pleine gamme dBTechnologies. La conception mécanique est réalisée pour permettre une évolutivité parfaite entre les modèles de subwoofers de la série, tandis que le logement M20 pour mât standard permet une combinaison facile et immédiate avec le système supérieur ; 2 points de fixation permettent l'utilisation des barres de suspension dédiées aux systèmes d'amplification dBTechnologies. Ce caisson robuste est également équipé de 4 poignées intégrées et d'un panneau arrière conçu pour faciliter le transport sur roulettes. La finition en polyurée complète les caractéristiques de série, garantissant durabilité et résistance.
En savoir plus

TECHNOLOGIES

Aurora Net
Aurora NetThis product is fully-compatible with Aurora Net software
PFC (Power Factor Corrector)
PFC (Power Factor Corrector)The Power Factor Corrector greatly improves the efficiency of the system. Performances of the amplifier are very stable and consistent, regardless of the quality of the mains. This also grants a worldwide compatibility of the power supply - from 90V to 265V 50/60Hz - and limits power consumption.
RDNet
RDNetDigital net for bi-directional control of connected devices. The acronym RDNet originates from the development, on behalf of RCF and dBTechnologies, of a universal network which allows adjustments in real time and supervision of all the connected systems, using cables based on ethernet cat 5 wires. With the specific software and the interfaces control 2 and control 8, a complete command of the acoustic system will be possible allowing real time supervision on each electrical component of the various speakers. RDNet allows you to monitor levels, limiters, and temperatures, select system presets, configure setups off-line, Mute units, Group modules and assigning group EQ, delay and phase, test individual components, automatically address system components, tap into LAN and USB interfaces, extend the network via wireless LAN access points.
Product code: 1030104080
Caractéristiques techniques
Speaker Type
Active Subwoofer


Caractéristiques acoustiques
Frequency Response [-10dB]
36Hz to Xover

Max SPL (1 m)
136 dB

LF
18"

LF Voice Coil
4"

Amplificateur
Amp Class
Class D with PFC

RMS Power
1600 W

Processeur
Controller
32bit processing

AD/DA Converter
24bit 96kHz

Limiter
Peak, Thermal, RMS

Crossover Frequency
60-65-70-75-80-90-100-110-120-400 [Hz]

Controls
FunctionControl (rotary)

Input Section
Signal Input/Output
1x XLR In/Out

1x PowerCon True In/Out

2x Ethercon In/Out

Mécanique
Housing
Plywood cabinet with Polyurea finish

Handles
4x side

Pole Mount
1x M20 on top

Rigging Points
2xPick Points on top to fix DRK 10/20 rigging frames

Width
578 mm (22.76 in)

Height
580 mm (22.83 in)

Depth
720 mm (28.35 in)

Weight
45.6 Kg (100 lbs)

Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
Filename: Category: Filetype: Size: Language: Release:
Manual_IGS1-IGS2_Rev1.0 Manual PDF 20,25 MB English 2025-09-08
FW_Installer_2.9_Osx.app Firmware ZIP 45,83 MB English 2025-10-13
FW_Installer_2.9_Win.exe Firmware ZIP 44,89 MB English 2025-07-21
Sales & Rental Network