DVA KS10

Subwoofers
Subwoofers
515 mm 640 mm 720 mm

FLYABLE ACTIVE SEMI-HORN-LOADED SUBWOOFER

900W RMS DIGIPRO G3 AMP TECHNOLOGY

134 dB MAX SPL

FREQUENCY RESPONSE [-10 dB]: 41 Hz - 120 Hz

LF: 1 x 18”, 4” v.c.

Weight: 43.4 kg (95.69 lbs)

Sales & Rental Network
Le DVA KS10 est un caisson de graves actif en configuration "semi-horn loaded", équipé d'un woofer de 18" et amplifié par un module d'amplification Digipro G3 capable d'atteindre 2000 W et de fournir une pression sonore allant jusqu'à 134 dB. KS10 peut être utilisé comme système compact dans des situations live, en combinaison avec le line array DVA K5 sur mât ou en configuration empilée. Le système peut également être utilisé en suspension avec des accessoires optionnels. Un codeur dédié permet de contrôler le délai (delay) par pas de 0,5 ms jusqu'à un maximum de 4,5 ms. Le système est équipé d'un commutateur d'inversion de phase et la modification LPF de 90 à 120 Hz.
En savoir plus

TECHNOLOGIES

Digipro® G3
Digipro® G3System of digital amplification engineered by dBTechnologies. Based on the previous Digipro projects, completely re-designed, lighter in weight and more efficient, new Heatsink, newest components which maximize the power with a lower consumption.
Product code: 1030102400C
Caractéristiques techniques
Speaker Type
Active Semi-horn loaded Flyable Subwoofer

Caractéristiques acoustiques
Frequency Response [- 10 dB]
41 Hz - 120 Hz

Max SPL
134 dB

Directivity
Omnidirectional

LF
18 "

Voice Coil LF
4 "

Amplificateur
Amp Technology
Digipro® G3

Amp Class
Class D

RMS Power
900 W

Peak Power
1800 W

Cooling
Convection

Power Supply
900 W SMPS with auto range PSU

Processeur
Controller
DSP 56 Bit

AD/DA COnverter
24 Bit / 48 KHz

Limiter
Dual Active Multiband RMS, Peak, Thermal

Crossover Frequency LF-HF
90, 120 Hz (selectable)

Slope LF-HF
24 dB/Octave

Input Section
Input Section
2X XLR Balanced

Output Section
2x XLR Balanced

Power Sockets
1 x Powercon In +

1 x Powercon Out

Controls
1 x Input Sensitivity Rotary Switch

1 x DSP Rotary (up to 4.5 ms on-board)

1 x Polarity Inversion Switch (0°-180°)

1 x X-Over Frequency Switch (90 Hz, 120Hz)

1 x Output Mode Switch (Link - X-Over)

Mécanique
Housing
Multiplex plywood

Handles
2x Side

Pole Mount
1x M20 on top

Rigging Points
2xPick Points on top to fix DRK 10/20 rigging frames


Width
515 mm (20.27 in)

Height
640 mm (25.19 in)

Depth
720 mm (28.34 in)

Weight
43.4 kg (95.69 lbs)

Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
Filename: Category: Filetype: Size: Language: Release:
DWG_DVA-KS10 Drawing DWG 0,36 MB English 2016-08-25
Brochure_DVA-K-Series Catalogues PDF 3,60 MB English 2017-02-02
CE_DVA-KS10 Certifications PDF 0,88 MB Italiano 2016-10-25
Manual_DVA-KS10_Rev1.0 Manual PDF 2,87 MB English 2016-11-03
UKCA_DVA-KS10 Certifications PDF 0,56 MB Italiano 2022-04-11
FW_DVA-KS10_v1.1.0 Firmware ZIP 0,08 MB English 2017-10-27
GLL_DVA-K5-KS10-EF3_v1.8 GLL ZIP 9,72 MB English 2017-07-10
RC MS12SUBH

RC MS12-SUBH

Sacs et housses
SRK acc

SRK-10

Installation
DRK 10

DRK-10 - Fly Bar (système de suspension)

Installation
DRK 20

DRK-20 - Fly Bar (système de suspension)

Installation
DS 2

DS 2

Installation
DS2 S

DS2-S

Installation
Kit Wheels

Roues

Transport
Sales & Rental Network