IS25T-WP is a 2-way passive speaker with two 5'' woofers and a 1'' compression driver for the high range.
This cabinet provides a constant dispersion of 60x100° and represents a rugged and performing solution for indoor and outdoor sound reinforcement, thanks to invisible mounting points and IP55 protection.
The rotatable horn allows for vertical and horizontal installations with high acoustic performance, using the same dedicated accessories as the VIO X205 system.
IS25T-WP retains the minimal design of the series, with the possibility of customizing the color finish of the white version by yourself.
En savoir plus
TECHNOLOGIES
EASE FocusEASE Focus makes configuring a DVA or VIO system so much easier as this software simulates the system in the virtual realm. It can depict several audience target zones at the same time to map out more intricate venues including different coverage areas such as arenas, bleachers, and balconies. Color 2D graphics provide an easily understandable view of throw patterns and sound pressure levels so you can configure the array for the best possible results. It also offers you easy access to key rigging parameters such as the height of the rigging frame, the choice of pick points, the array’s bend, total weight, and system preset selections.
Rotatable HornSpecially designed, rotatable high-frequency horns provide very clean and constant directivity. By rotating the horn, the directivity of high frequencies can be adjusted, depending on the cabinet being assembled horizontally or vertically. A great and professional feature for fixed installation purposes or when a multifunctional speaker is used as stage monitor.
White version availableThis product is available for purchase in black or white.
IP55 RatingThe product is resistant to dust and low-pressure water jets. Specifically, IP55 Rating offers limited protection against dust ingress and can withstand water jets from any direction without compromising functionality. This rating is commonly used for devices intended for both indoor and outdoor use.
Product code: 1030401240
Caractéristiques techniques
Speaker Type
Passive 2-way Speaker
Caractéristiques acoustiques
RMS Power
120 W
Peak Power
480 W
Frequency Response [-6 dB]
85 Hz - 20,000 Hz
Impedance
8 Ohm
Sensitivity 1W@m
94.5 dB
Max SPL
121.5 dB
HF
1x 1", 1.4" v.c.
LF
2x 5", 1" v.c.
Dispersion
100x60° [Rotatable Horn]
X-Over Frequency
1500 Hz (internal X-Over)
Input Section
Connections
Screw terminal block (IN+ | IN- | OUT+ | OUT-)
Mécanique
Housing
Plywood, polyurea finish
Rigging points
2x M10 threaded nut (top and bottom)
IP rating
IP 55
Width
152 mm (6 in)
Height
485 mm (19 in)
Depth
240 mm (9.4 in)
Weight
7 kg (15.4 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
