VIO X206

Point Sources
Back to gallery
Point Sources
210 mm 650,8 mm 270 mm

2-WAY ACTIVE LOUDSPEAKER

900 W RMS CLASS-D DIGIPRO® G3 AMPLIFIER

MAX SPL131 dB

FREQUENCY RESPONSE [-6dB]: 70 - 17.500/18.000 Hz

AURORA NET READY

HF: 1x 1”, 1.75" v.c.

LF: 2x 6.5”, 1.75" v.c.

Sales & Rental Network
VIO X206 est une enceinte professionnelle ultra-compacte qui délivre une pression sonore et une réponse linéaire au plus haut niveau, tout comme VIO X205, mais en plus de cela, vous pouvez la transformer en un véritable système line array compact. L'enceinte a été conçue en deux versions différentes, l'une d'elles est équipée d'un pavillon rotatif de 90° par 60°. L'autre est équipé d'un guide d'ondes à deux voies offrant une dispersion de 100° sur 15°, ce qui est parfait pour les applications de line array. Le véritable joyau ici est que les utilisateurs peuvent retirer et échanger les pavillons à tout moment, en fonction de leurs besoins.
Le firmware permettant d'adapter le comportement des 2 pavillons peut être modifié en conséquence grâce à l'interrupteur rapide situé à l'arrière du boîtier.
Le VIO X206 est équipé de deux transducteurs néodyme 6,5" et d'un driver 1", alimentés par un ampli Digipro G3 de 900W RMS. Néanmoins, comme toutes les enceintes compagnes de la série VIO X, l'enceinte permet une mise en réseau complète grâce à RDNet et une surveillance et un contrôle en temps réel via Aurora Net.
Grâce à ces deux variantes, elle couvre une large gamme d'applications, répondant aux exigences de la production et de l'intégration. Cette armoire mince et élégante peut facilement s'intégrer à une scène de spectacle, à une installation d'événement d'entreprise, ainsi qu'à une salle de réunion ou à un bar. Une série d'accessoires vous aide à créer la meilleure configuration pour le lieu. Plusieurs supports permettent d'adapter le X206 sur un pied d'enceinte (VB-2X6, SA-2X6), l'un d'eux permet également de le faire voler avec une pince en C (VB-2X6). Une simple plaque de liaison (LP-2) est disponible pour les coupler ou les mettre en réseau. Il est également possible d'utiliser 2 versions de 90x60° en vol ou au sol avec un support de 60° (LP-3). Un support supplémentaire de 60° permet de faire voler ou de monter jusqu'à 6 boîtes 90x60° côte à côte, avec un angle stable. Un support en forme de U (HB-2X6) permet de réaliser diverses configurations telles que le montage mural ou le montage en treillis. Le même accessoire sert également de support de poteau horizontal pour un X206 à 90x60° ou pour les versions à line array multiple du X206. Si vous avez besoin de ranger un frontfill, ou si vous prévoyez d'empiler au sol plusieurs line arrays directement sur un sub, ce sera une solution sûre et fiable pour sécuriser la charge avec le support fileté M20. Enfin deux flybars sont disponibles, un standard pour un seul array (DRK-1) et un multiple (DRK-2) qui permet de faire voler 2 arrays de tops ou de subs, ou même des X206 et des subs VIO S115 ensemble.
En savoir plus

TECHNOLOGIES

Aurora Net
Aurora NetThis product is fully-compatible with Aurora Net software
Digipro® G3
Digipro® G3System of digital amplification engineered by dBTechnologies. Based on the previous Digipro projects, completely re-designed, lighter in weight and more efficient, new Heatsink, newest components which maximize the power with a lower consumption.
Linear Phase FIR Filters
Linear Phase FIR FiltersA low-latency sound processing featuring Linear Phase FIR filters allows cabinets to deliver an extremely coherent audio performance, standing out for its intelligibility and clarity from every listening position. This is also achieved by making the phase response as linear as possible, avoiding any distortion.
Opto-isolated Preamp
Opto-isolated PreampThe floating audio input design grants a digital optical isolation between earth ground from the mains and the audio ground flowing into the Preamplifier board.This galvanic isolation greatly improves resistance to interferences and any unwanted buzzing and noises.
RDNet
RDNetDigital net for bi-directional control of connected devices. The acronym RDNet originates from the development, on behalf of RCF and dBTechnologies, of a universal network which allows adjustments in real time and supervision of all the connected systems, using cables based on ethernet cat 5 wires. With the specific software and the interfaces control 2 and control 8, a complete command of the acoustic system will be possible allowing real time supervision on each electrical component of the various speakers. RDNet allows you to monitor levels, limiters, and temperatures, select system presets, configure setups off-line, Mute units, Group modules and assigning group EQ, delay and phase, test individual components, automatically address system components, tap into LAN and USB interfaces, extend the network via wireless LAN access points.
SMPS
SMPSAn SMPS is an electronic power supply that uses high-frequency switching and control circuits to convert electrical power efficiently. It transforms input voltage (AC or DC) to a regulated output voltage with minimal energy loss. Commonly used for its high efficiency, small size, and lightweight design.
USB Data Port
USB Data PortThanks to this universal data port, the user will be able to perform firmware upgrades
Product code: 1030103970
Caractéristiques techniques
Speaker Type
2 Way Active Loudspeaker

Caractéristiques acoustiques
Usable bandwidth [-10dB]
66 - 19.500 Hz / 66 - 18.000 Hz [VIO X206-100]

Frequency Response [-6dB]
70 - 18.000 Hz / 70 - 17.500 Hz [VIO X206-100]

Max SPL
131 dB

HF
1x 1”, 1.75 v.c.

LF
2x 6.5”, 1.75" v.c

VIO X206 Directivity
60° x 90° [rotatable]

VIO X206-100 Directivity
100° x 15° [H x V]

Amplificateur
Amplifier
900 W RMS Class-D Digipro® G3

Cooling
Convection

Power Supply
Auto-range SMPS

Processeur
Controller
DSP 32 bit


AD/DA Converter
24 bit/96 kHz


Limiter
Peak, RMS, Thermal


Processing
FIR Linear Phase Filters

Input Section
Signal Input
1 x XLR balanced, 1 x RJ45 Link (RDNet), 1x USB (Data Service)

Signal Output
1x XLR balanced, 1 x RJ45 Link (RDNet)

Power Socket
1x PowerCON TRUE1 In

1x PowerCON TRUE1 Out

Controls
1x input Sensitivity Rotary Encoder (10x presets)

1x Horn Model Selection Switch

1x On LED

1x Status LED

1x Signal LED

1x Limiter LED

3x RDNet Status LED

Mécanique
Housing
Wooden Cabinet, Polyurea painting

Handles
2 Integrated

Rigging points
2x M10 Threaded Nuts (top and bottom)

Width
210 mm (8.3 in)

Height
650 mm (25.6 in)

Depth
270 mm (10.6 in)

Weight
17.3 kg (38.14 lbs)

Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
View All References
Filename: Category: Filetype: Size: Language: Release:
DWG_VIO-X206 Drawing DWG 2,21 MB English 2022-06-28
CE_VIO-X206 Certifications PDF 0,56 MB Italiano 2022-04-04
Datasheet_VIO-X206 Data Sheet PDF 0,29 MB English 2023-03-30
Manual_VIO-X206_Rev.1.3 Manual PDF 20,03 MB English 2024-10-24
UKCA_VIO-X206 Certifications PDF 0,58 MB Italiano 2022-04-11
FW_VIO-X206_v02.00.01.dbu2 Firmware ZIP 0,17 MB English 2021-10-19
GLL_VIO-X_Series_v1.0 GLL ZIP 2,75 MB English 2021-07-29
GLL_VIO-X206 GLL ZIP 5,80 MB English 2021-06-30
GLL_VIO-X206_SB-2X6_V1.0.exe GLL ZIP 4,49 MB English 2024-05-21
GLL_VIO-X206-Array_v1.1 GLL ZIP 2,70 MB English 2021-07-29
SB 2x6

SB-2X6

Installation
LP 16

LP-16

Installation
LP 13

LP-13

Installation
SA 35

SA-35

Installation
HK 6090 d

HK-6090

Installation
HK 15100WG d

HK-15100WG

Installation
TB M20

TB-M20

Installation
DRK 2

DRK-2

Installation
DRK 1

DRK-1

Installation
LP 5

LP-5

Installation
LP 3

LP-3

Installation
LP 2

LP-2

Installation
SA 2x6

SA-2X6

Installation
VB 2x6

VB-2X6

Installation
HB 2X6

HB-2X6

Installation
RC 1

RC-1

Sacs et housses
FC 206

FC-206

Sacs et housses
Sales & Rental Network