DVA S1518N

Subwoofers
Torna alla galleria
Subwoofers
614 mm 515 mm 720 mm

ACTIVE BANDPASS SUBWOOFER

1500W RMS DIGIPRO G2 AMP TECHNOLOGY

138 dB MAX SPL

FREQUENCY RESPONSE [-+/- 3 dB]: 39 - 120 Hz

LF: 1 x 18”, 4” v.c.

Weight: 46 kg (101.41 lbs)

Sales & Rental Network
Questo diffusore possiede un DSP a 56 Bit in grado di gestire il funzionamento del subwoofer e di garantire prestazioni dinamiche ed alta precisione.

Il box in multistrato di betulla permette di stabilizzare le vibrazioni mantenendo il prodotto molto leggero e versatile. Grazie alle meccaniche opzionali può essere montato sui fly bar della serie DVA.

Il crossover regolabile da 75 a 120 Hz (passi di 5 Hz) incorporato ed il delay fino a 4,5 ms consentono ogni tipologia di installazione senza l’utilizzo di processori esterni.

Tramite il connettore RJ45 (in/out) incorporato e il software DVA Network, il sistema di controllo RDNet permette il completo controllo del diffusore.
Scopri di più

TECNOLOGIE

Aurora Net
Aurora NetThis product is fully-compatible with Aurora Net software
Digipro® G2
Digipro® G2System of digital amplification engineered by dBTechnologies. Based on the previous Digipro project, the newest G2 versions' efficiency has been improved by cutting down on consumption and heating. The introduction of a 'new avant-garde' component, a better s/n relation and a lighter weight, confer a superior dynamism to the new Digipro G2 digital speakers.
Neodymium Transducers
Neodymium TransducersNeodymium is a metal belonging to the family of the “rare earth”, a particular material which creates a powerful magnetic field once charged. This material, used in acoustic transducers, possesses a far superior magnetic power compared to the classical ferrite which allows its dimensions to be reduced, favoring its weight and space capacity.
PFC (Power Factor Corrector)
PFC (Power Factor Corrector)The Power Factor Corrector greatly improves the efficiency of the system. Performances of the amplifier are very stable and consistent, regardless of the quality of the mains. This also grants a worldwide compatibility of the power supply - from 90V to 265V 50/60Hz - and limits power consumption.
Preset System
Preset SystemThe opportunity of modifying the character and equalization of a speaker is a very important prerogative in adapting a speaker to multiple functions. The introduction of the Preset System enables to choose directly from the box the most adeguate equalization for the desired use, optimizing performances without the need of external processors. The management of phase, limiter and x-over will be modified automatically depending on the chosen set-up, preserving the internal acoustic equipment.
RDNet
RDNetDigital net for bi-directional control of connected devices. The acronym RDNet originates from the development, on behalf of RCF and dBTechnologies, of a universal network which allows adjustments in real time and supervision of all the connected systems, using cables based on ethernet cat 5 wires. With the specific software and the interfaces control 2 and control 8, a complete command of the acoustic system will be possible allowing real time supervision on each electrical component of the various speakers. RDNet allows you to monitor levels, limiters, and temperatures, select system presets, configure setups off-line, Mute units, Group modules and assigning group EQ, delay and phase, test individual components, automatically address system components, tap into LAN and USB interfaces, extend the network via wireless LAN access points.
SMPS
SMPSAn SMPS is an electronic power supply that uses high-frequency switching and control circuits to convert electrical power efficiently. It transforms input voltage (AC or DC) to a regulated output voltage with minimal energy loss. Commonly used for its high efficiency, small size, and lightweight design.
Codice prodotto: 1030101711
Dati tecnici
Speaker Type
Active Bandpass Subwoofer

Dati acustici
Frequency Response [+/- 3dB]
39 - 120 Hz

Max SPL
138 dB

Directivity
Omnidirectional, Cardiod Option with DSP setup

LF
18 "

Voice Coil LF
4 "

Amplificatore
Amp Technology
Digipro® G2

Amp Class
Class D

Power Supply
1.5 kW SMPS

LF Amp
1500 W RMS

Cooling
Convection

Processore
Controller
DSP 56 bit

AD/DA Converter
24bit/ 96 kHz

System Presets
X-Over,Delay

Phase
0, 180 °

Limiter
RMS, Peak, Thermal

Delay Option
0-4.5 ms internal

Crossover Frequency LF-MF
75-120Hz | steps of 5Hz

LF-Xover out slope
24 dB/Octave

Meccanica
Housing
Multiplex plywood

Housing Design
Rectangular

Handles
3x Per Side

Accessory
Dolly, Wheels 100mm,

Dust Cover, Rain Cover

Pole Mount
M20

Rigging Points
integrated for SRK10 fly kit

2xPick Points on top to fix

DRK10/20 rigging frames

Width
515 mm (20.6 in)

Height
640 mm (25.6 in)

Depth
720 mm (28.8 in)

Weight
46 kg (101.41 lbs)

Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
Nome file: Categoria: Tipologia: Peso: Lingua: Rilascio:
DWG_DVA-S1518 Drawing DWG 0,70 MB English 2015-05-04
CE_DVA-S1518N Certifications PDF 0,93 MB Italiano 2016-10-25
Manual_DVA-S1518N-S2585N_Rev4.0 Manual PDF 17,79 MB English 2015-02-10
FW_DVA-S1518_v3.1.1 Firmware ZIP 0,28 MB English 2017-06-01
GLL_DVA-S1518N_v1.gll GLL ZIP 18,19 MB English 2016-10-10
DS2 S

DS2-S

Installazione
DO 18

DO 18

Trasporto
DWK 20

DWK 20

Trasporto
SRK acc

SRK-10

Installazione
Tour Cover SUB

TC 10S

Borse e coperture
DS 2

DS 2

Installazione
DRK 20

DRK-20

Installazione
DRK 10

DRK-10 & DRK-10W

Installazione
DRP S30 copia

DRP S15

Borse e coperture
Sales & Rental Network