INGENIA IGS2

Subwoofers
Torna alla galleria
Subwoofers
1160 mm 580 mm 720 mm

ACTIVE BASS-REFLEX SUBWOOFER

3200W RMS AMPLIFIER

142 dB MAX SPL

USABLE BANDWIDTH [- 6 dB]: 39Hz to Xover

LF: 2 x 18”, 4” v.c. - NEODYMIUM

WEIGHT: 80.8 Kg (178 lbs)

Sales & Rental Network
IGS2 è dotato di due woofer da 18" in neodimio all'interno di un solido cabinet bass-reflex. La potente sezione amplificatrice doppia, controllata da DSP in Classe D, può gestire fino a 3200 W (potenza RMS), garantendo massima affidabilità e una pressione sonora piena e potente. Il sistema è abilitato tramite RDNet per un monitoraggio e controllo in tempo reale utilizzando il software Aurora Net (disponibile per Windows e Mac), che supporta configurazioni avanzate tra IGS1 e un perfetto abbinamento con i sistemi full-range dBTechnologies.
Il design meccanico consente una perfetta scalabilità tra i modelli di subwoofer di questa linea, mentre due filettature M20 per poli standard rendono facile e immediato l'abbinamento con l'unità superiore; quattro punti di sollevamento permettono l'uso di fly-bar dedicate ad altri sistemi top dBTechnologies per installazioni live.
Questo robusto cabinet è inoltre dotato di quattro maniglie integrate e di un pannello posteriore per un facile trasporto su ruote.
Una finitura in poliurea completa le caratteristiche standard, garantendo durata e resistenza.
Scopri di più

TECNOLOGIE

Aurora Net
Aurora NetThis product is fully-compatible with Aurora Net software
PFC (Power Factor Corrector)
PFC (Power Factor Corrector)The Power Factor Corrector greatly improves the efficiency of the system. Performances of the amplifier are very stable and consistent, regardless of the quality of the mains. This also grants a worldwide compatibility of the power supply - from 90V to 265V 50/60Hz - and limits power consumption.
RDNet
RDNetDigital net for bi-directional control of connected devices. The acronym RDNet originates from the development, on behalf of RCF and dBTechnologies, of a universal network which allows adjustments in real time and supervision of all the connected systems, using cables based on ethernet cat 5 wires. With the specific software and the interfaces control 2 and control 8, a complete command of the acoustic system will be possible allowing real time supervision on each electrical component of the various speakers. RDNet allows you to monitor levels, limiters, and temperatures, select system presets, configure setups off-line, Mute units, Group modules and assigning group EQ, delay and phase, test individual components, automatically address system components, tap into LAN and USB interfaces, extend the network via wireless LAN access points.
Codice prodotto: 1030104090
Dati tecnici
Speaker Type
Active Subwoofer

Dati acustici
Frequency Response [-10dB]
36Hz to Xover

Max SPL (1 m)
142 dB

LF
2x 18"

LF Voice Coil
4"

Amplificatore
Amp Class
Class D with PFC

RMS Power
3200 W

Processore
Controller
32bit processing

AD/DA Converter
24bit 96kHz

Limiter
Peak, Thermal, RMS

Crossover Frequency
60-65-70-75-80-90-100-110-120-400 Hz

Controls
FunctionControl (rotary)

Input Section
Signal Input/Output
1x XLR In/Out

1x PowerCon True In/Out

2x Ethercon In/Out

Meccanica
Housing
Plywood cabinet with Polyurea finish

Handles
4x side

Pole Mount
2x M20 (1 on top and 1 on side)

Rigging Points
4x Pick Points on top to fix DRK 10/20 rigging frames

Width
1160 mm (45.67 in)

Height
580 mm (22.83 in)

Depth
720 mm (28.35 in)

Weight
80.8 Kg (178 lbs)

Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
Nome file: Categoria: Tipologia: Peso: Lingua: Rilascio:
Manual_IGS1-IGS2_Rev1.0 Manual PDF 20,25 MB English 2024-11-28
FirmwareInstaller_2.5_Osx.app Firmware ZIP 43,75 MB English 2025-05-27
FirmwareInstaller_2.5_Win.exe Firmware ZIP 42,84 MB English 2025-05-27
Sales & Rental Network