IS26T è uno speaker passivo full range dotato di due woofer da 6,5" più un driver a compressione da 1" per la gamma più alta.
Sono disponibili 2 diverse opzioni di copertura, che forniscono rispettivamente una dispersione di 60 x90° oppure un pattern di 100x15°, che, grazie ad una guida d'onda, trasforma il diffusore point source in un line array.
È possibile montare gli speaker o impilare gli array con gli stessi accessori utilizzabili per il VIO X206.
Inutile dire che la parola chiave qui è: facilità di installazione e discrezione. Ecco perché ogni singolo sistema della serie IS è dotato di un design liscio con pochi punti invisibili di montaggio, connettori Phoenix, versione nera o bianca.
Scopri di più
TECNOLOGIE
EASE FocusEASE Focus makes configuring a DVA or VIO system so much easier as this software simulates the system in the virtual realm. It can depict several audience target zones at the same time to map out more intricate venues including different coverage areas such as arenas, bleachers, and balconies. Color 2D graphics provide an easily understandable view of throw patterns and sound pressure levels so you can configure the array for the best possible results. It also offers you easy access to key rigging parameters such as the height of the rigging frame, the choice of pick points, the array’s bend, total weight, and system preset selections.
Rotatable HornSpecially designed, rotatable high-frequency horns provide very clean and constant directivity. By rotating the horn, the directivity of high frequencies can be adjusted, depending on the cabinet being assembled horizontally or vertically. A great and professional feature for fixed installation purposes or when a multifunctional speaker is used as stage monitor.
White version availableThis product is available for purchase in black or white.
IP32 RatingThe Product is protected from tools and wires larger than 2.5mm in diameter, and it is also protects against water spray at an angle less than 15 degrees from vertical.
Codice prodotto: 1030400900
Dati tecnici
Speaker Type
Passive 2-way Speaker
Dati acustici
RMS Power
250 W
Peak Power
1000 W
Frequency Response [-6 dB]
80 Hz - 20,000 Hz
Impedance
8 Ohm
Sensitivity 1W@m
94 dB
Max SPL
124 dB
HF
1x 1", 1.7" v.c.
LF
2x 6.5", 1.7" v.c.
IS26T Dispersion
60x90° [rotatable horn]
IS26T100 Dispersion
100x15° [H x V]
X-Over Frequency
1200 Hz (internal X-Over)
Input Section
Connections
Phoenix
Meccanica
Housing
Plywood, water-painted coating
Rigging points
2x M10 threaded nut (top and bottom)
IP rating
IP 32
Width
210 mm (8.3 in)
Height
650 mm (25.6 in)
Depth
270 mm (10.6 in)
Weight
15.5 kg (34.17 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
