DVA MS12
DVA MS12
DVA MS12
DVA MS12
DVA MS12
DVA MS12
go back to standard view
close
DVA MS12
DVA MS12
Especially designed to fit perfectly with an M2M and M2S array, the MS12 active sub is equipped with a single 12" woofer in a bass reflex enclosure, acting as a perfect low-end extension module for DVA Mini systems.
Especially designed to fit perfectly with an M2M and M2S array, the MS12 active sub is equipped with a single 12" woofer in a bass reflex enclosure, acting as a perfect low-end extension module for DVA Mini systems.

This subwoofer delivers an incredible SPL considering its very compact dimensions, and it can be easily used both flown and ground stacked.

The smart design of the feet allows the user to avoid the dull removal of the flying brackets: it is possible to remove the feet in few seconds and screw them again upside-down. In this way any contact between the flying brackets and the ground is avoided, as only the rubber feet will touch it. A practical X-over out can be used to feed signal straight to the line arrays modules, simplifying considerably the signal and power cabling.

DVA MS12 comes with the new generation of exclusive digital amplifiers Digipro G3, engineered by dBTechnologies and distinguished by an exceptionally lightweight design and a very remarkable efficiency. 

An integrated USB B-type port on the DVA MS12 amplifier allows the user to access the complete telemetry of the sub, monitoring the status of the speaker, including total playing hours, temperatures and performances reports. 

Technical Data
Speaker Type
Active bass reflex flyable subwoofer
Acoustical data
Frequency Response [-6dB]
45 - 140 Hz
Frequency Response [-10dB]
40 - 165 Hz
Max SPL
131 dB
LF
12"
Voice Coil LF
3"
Directivity
Omnidirectional
Amplifier
Amp Technology
Digipro® G3
Amp Class
Class D
Power Supply
700W SMPS with PSU Auto-range (110V~ and 220V~)
LF Amp
700 W RMS (1400 W Peak)
Cooling
Convection
Processor
Controller
DSP 56 bit
AD/DA Converter
24 bit/48 kHz
Controls
X-Over frequency selection, Phase selection (0° or 180°), Outputs mode selection (Link/X-over), Mini-USB type “B” port (service data)
Limiter
Dual active, RMS/Peak, Thermal
Crossover Frequency LF-HF
90 - 120 Hz
LF X-over out slope
24 dB/Octave
Mechanics
Housing
Multiplex plywood - Polyurea painting
Handles
1x left side, 1x right side
Feet
4x Dual Position Reversable Feet (flying/stacking mode)
Fittings
M20 screw for pole mount on top side, integrated hardware with fast lock mechanics
Width
460 mm (18.1 in)
Height
430 mm (16.9 in)
Depth
385 mm (15.2 in)
Weight
26.5 kg (58.4 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
Features
  • ACTIVE BASS REFLEX SUBWOOFER
  • FLYABLE
  • INTEGRATED HARDWARE WITH INNOVATIVE QUICK-LOCK MECHANICS
  • LIGHTWEIGHT
  • 700W RMS DIGIPRO® G3 CLASS-D AMPLIFIER
  • SWITCHED MODE POWER SUPPLY WITH AUTO-RANGE
  • DIGITAL CONTROLLER ON BOARD
  • DUAL FUNCTION FEET
/images/299/817/70x70/nocrop/q-100/align-4/iconpertechnologies.png
dBTechnologies Composer
A software able to supply each and every necessary information on the installation of the DVA and VIO systems depending on the necessities of the event.
Visit Composer to download the software and get more infos.
/images/299/1848/70x70/nocrop/q-100/align-4/digipro%20G3.png
Digipro® G3
System of digital amplification engineered by dBTechnologies. 

Based on the previous Digipro projects, completely re-designed, lighter in weight and more efficient, new Heatsink, newest components which maximize the power with a lower consumption.

/images/299/1849/70x70/nocrop/q-100/align-4/PSu%20auto-range.png
PSU with auto-range

It's a power supply which allows everybody in the world to use the speaker at any power voltage thanks to the auto-adjustment technology: the internal switch automatically detect the voltage and changes from 110/120v to 230/240v.

/images/299/820/70x70/nocrop/q-100/align-4/ICONES_XOVER.png
X-over
The cross over (X-over) is the intersection point of different frequencies from different ranges.
In sound systems it delimitates the areas in which low, mid, and high frequencies work.
A cross over is also an electronic object, active or passive, which comands the division of the frequencies' areas.
In other words, it separates an incoming full range signal into two or more areas of frequency.

Accessories
Related products
find your distributor
Continent
Continent
North America
Latin America
Europe
Africa
Asia
Oceania
Middle East
Country
Country