dBTechnologies Network is the software to control remotely dBTechnologies products using RDNet Protocol.
Advanced tools for a faster live speaker management.
The RDNet link enables the sound tech to adjust presets, levels, and all other key parameters conveniently at the FOH location.
The tech's PC receives data concerning temperature, limiter status, levels, and all further operating parameters in real time.
dBTechnologies Network use RDNet Control 8 or Control 2 to interfaces with PC via LAN or USB.
All the necessary adjustments for the individual modules may be made off-line when planning the sound reinforcement system.
The stored program can be transmitted if the system is already installed on site.
dBTechnologies Network 3.3.1
- New Aligned the software to the latest device’s fw versions
- Bug-Fix Fw version label into the summary view always report “1” as value
dBTechnologies Network 3.2.0.5523
dBTechnologies 3.2.0.5523 allows to OPTIONALLY upgrade
DVA T8 and DVA t12 firmware.
Thanks to this upgrade the system performances will
benefit from FIR filters allowing a better high freq coherency in array systems
and a consequent audio performance at a distance.
Moreover, linear-phase crossover allows a better coupling
between arrayed modules.
WARNING
FIR filters introduce a bigger latency in DSP. Therefore it
is mandatory to upgrade all the modules used in a line array system (DVA T8,
DVA T12, or DVA T8+DVA T12).
Hence,
DO NOT USE FIR FILTERS UPGRADED DVA T8 WITH OTHERS DVA T8 IN
THE SAME LINE ARRAY SYSTEM
DO NOT USE FIR FILTERS UPGRADED DVA T12 WITH OTHERS DVA T12
IN THE SAME LINE ARRAY SYSTEM
DO NOT USE FIR FILTERS UPGRADED DVA T8+dva T12 WITH OTHERS DVA T8+ DVA T12 IN THE SAME LINE
ARRAY SYSTEM (hybrid system)
DO NOT USE DVA K5 SYSTEMS WITH DVA T SYSTEMS (BOTH WITH AND
WITHOUT FIR FILTERS)
Once upgraded your systems with FIR filters, you are invited
to download all support material (dBTechnologies Composer and Ease Focus 3 GLL
files) to facilitate system alignment with DVA subwoofers.